OEM Toyota FJ Cruiser Shift Cable

Toyota FJ Cruiser Shift Cable Parts and Q&A

• Shift Control Cable
  33820-60070
  Q: How to install the Shift Cable assembly for the A750E automatic transmission on Toyota FJ Cruiser?

  A:

  The first key step to install the A750E automatic transmission control cable assembly is to connect the cable to the transmission using a nut and new clip while applying 14 Nm of torque (143 kgf-cm or 10 ft-lbf). You should wire the control cable to the body using the 2 nuts but only apply 5.5 Nm (56 kgf-cm, 49 in-lbf) torque. After securing the control cable with 3 claws, use the body-mounting steps with two nuts and maintain the same torque value of 5.5 Nm (56 kgf-cm, 49 in-lbf). The control cable installment ends with installation of new lock clip for security. You must install the front console box followed by the console upper rear panel sub-assembly before placing the parking brake hole cover sub-assembly.