How to remove the fuel pressure regulator assembly on Toyota Corolla?

Begin by draining fuel system pressure followed by disconnecting the negative cable from the battery before proceeding with fuel pressure regulator assembly removal from a 2ZR-FE system. The first step requires removal of the fuel suction tube assembly with pump and gauge from the fuel tank before draining the fuel. The removal process starts with disconnecting the fuel sender gauge assembly and the fuel pump through wire harness connector removal and breaking the fuel pump harness connector and fuel pump filter hose free. To separate the fuel pump sub-tank start by removing its E-ring and then unfastening its two claws. Keep the indicated tube in place while performing this operation. A screwdriver with taped tip should be used to release the 2 claws for No.1 fuel suction support removal followed by the 5 claw release for removing the fuel pump filter and fuel pump from the fuel filter while taking caution to protect the fuel pump filter and suction filter. Remove both fuel pump hardware connectors and remove the O-ring from the assembly. A protected-tape-wrapped screwdriver should be used to remove the fuel pressure regulator assembly by slowly pulling it from its fixed position because the O-ring between the regulator and fuel filter is firmly installed. Remove the two O-rings that are present on the regulator assembly.

How to install the fuel pressure regulator assembly on Toyota Corolla?

The installation process of fuel pressure regulator assembly for 2ZR-FE requires applying gasoline to two new O-rings before placing them on the regulator assembly. After that install the Fuel Pressure Regulator Assembly. After the fuel pump install the system requires the driver to mount the fuel sender gauge assembly. The motorist must install both fuel suction tube assembly along with pump and gauge to the fuel tank next. You must check the fuel system for leakage before connecting the cable to the negative battery terminal.

OEM Toyota Corolla Fuel Pressure Regulator

Fuel Tank Pressure Regulator

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

8 Fuel Pressure Regulators found

View related parts
Toyota Corolla Fuel Pressure Regulator
Part Number: 23280-22010
$80.57 MSRP: $113.09
You Save: $32.52 (29%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Regulator Assembly, Fuel; Fuel Injection Pressure Regulator; Pressure Regulator; Regulator Assembly, Fuel Pressure
- Manufacturer Note: TYPE B:REFER TO ILLUSTRATION
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
Fits the following Vehicles:
- 1998-2004 Toyota Corolla | CE, LE, S, VE | 4 Cyl 1.8 L GAS
View related parts
Toyota Corolla Fuel Pressure Regulator
Part Number: 23280-21010
$80.57 MSRP: $113.09
You Save: $32.52 (29%)
Ships in 1 Business Day
ADD TO CART
Product Specifications
- Other Name: Regulator Assembly, Fuel; Fuel Injection Pressure Regulator; Pressure Regulator; Regulator Assembly, Fuel Pressure
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
Fits the following Vehicles:
- 2020-2023, 2005-2013 Toyota Corolla | Base, CE, Hybrid LE, Hybrid SE, Hybrid XLE, L, LE, S, SE, XLE, XRS, XSE | 4 Cyl 1.8 L FULL HYBRID EV-GAS (FHEV), 4 Cyl 1.8 L GAS, 4 Cyl 2.0 L GAS, 4 Cyl 2.4 L GAS
View related parts
Toyota Corolla Pressure Regulator
Part Number: 23070-25020
$43.25 MSRP: $60.19
You Save: $16.94 (29%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Valve Assembly, Fuel Main; Fuel Injection Pressure Regulator; Fuel Pressure Regulator
- Manufacturer Note: MARK 23070-25020
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
Fits the following Vehicles:
- 2019-2024 Toyota Corolla | Nightshade, SE, SE Apex, SE Nightshade, XSE, XSE Apex | 4 Cyl 2.0 L GAS
View related parts
Toyota Corolla Fuel Pressure Regulator
Part Number: 23280-15020
$122.66 MSRP: $173.63
You Save: $50.97 (30%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Regulator Assembly, Fuel; Fuel Injection Pressure Regulator; Pressure Regulator; Regulator Assembly, Fuel Pressure
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
Fits the following Vehicles:
- 1993-1997 Toyota Corolla | Base, CE, DX, LE | 4 Cyl 1.6 L GAS, 4 Cyl 1.8 L GAS
View related parts
Toyota Corolla Fuel Pressure Regulator
Part Number: 23270-28052
$168.13 MSRP: $238.01
You Save: $69.88 (30%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Damper Assembly, Fuel Pressure Pulsation; Fuel Pressure Damper; Damper
- Replaces: 23270-28050, 23270-28051
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
Fits the following Vehicles:
- 2009-2012 Toyota Corolla | Base, L, LE, S, XLE, XRS | 4 Cyl 1.8 L GAS, 4 Cyl 2.4 L GAS
View related parts
Toyota Corolla Fuel Pressure Regulator
Part Number: 23280-16070
Product Specifications
- Other Name: Regulator Assembly, Fuel; Regulator Assembly, Fuel Pressure
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
Fits the following Vehicles:
- 1990-1991 Toyota Corolla | Base, DLX, DLX All Trac, GTS, LE, SR5, SR5 All Trac | 4 Cyl 1.6 L GAS
View related parts
Toyota Corolla Fuel Pressure Regulator
Part Number: 23280-16020
Product Specifications
- Other Name: Regulator Assembly, Fuel; Fuel Injection Pressure Regulator; Pressure Regulator; Regulator Assembly, Fuel Pressure
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
Fits the following Vehicles:
- 1984-1987 Toyota Corolla | Sport DLX, Sport GTS, Sport SR5 | 4 Cyl 1.6 L GAS
View related parts
Toyota Corolla Fuel Pressure Regulator
Part Number: 23280-16120
Product Specifications
- Other Name: Regulator Assembly, Fuel; Fuel Injection Pressure Regulator; Pressure Regulator; Regulator Assembly, Fuel Pressure
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
Fits the following Vehicles:
- 1990-1992 Toyota Corolla | Base, DLX, DLX All Trac, GTS, LE, SR5, SR5 All Trac | 4 Cyl 1.6 L GAS

Toyota Corolla Fuel Pressure Regulator

Choose genuine Fuel Pressure Regulator that pass strict quality control tests. You can trust the top quality and lasting durability. Shopping for OEM Fuel Pressure Regulator for your Toyota Corolla? Our website is your one-stop destination. We stock an extensive selection of genuine Toyota Corolla parts. The price is affordable so you can save more. It only takes minutes to browse and find the exact fit. Easily add to cart and check out fast. Our hassle-free return policy will keep you stress-free. We process orders quickly for swift delivery. Your parts will arrive faster, so you can get back on the road sooner.

The Fuel Pressure Regulator in Toyota Corolla vehicles is required in regard to the electronic fuel injection system to regulate the fuel pressure in the system. It is usually installed on the fuel rail and runs on a spring and diaphragm principle. Through attaching to the engine vacuum as well as to the fuel return line, the regulator controls fuel supply in accordance with the needs of the engine where it is located; thus, the fuel which is not needed when the engine is idling returns to the tank and the fuel supply is limited at the moment the latter is required during the acceleration process. There has been a few generations of Fuel Pressure Regulators that have been incorporated in Toyota Corolla models with both pressure reducing and back-pressure types. For those who require improved performance, upgraded adjustable regulators are supplied whereby tuners can adjust in order to get the exact perfect mix of air and fuel. These regulators are so designed to enable compatibility with different fuel systems in a way that would enable Toyota Corolla vehicles to satisfy various performance requirements.

Toyota Corolla Fuel Pressure Regulator Parts and Q&A

Fuel Pressure Regulator
23270-28052
Q: How to remove the fuel pressure regulator assembly on Toyota Corolla?
A:
Begin by draining fuel system pressure followed by disconnecting the negative cable from the battery before proceeding with fuel pressure regulator assembly removal from a 2ZR-FE system. The first step requires removal of the fuel suction tube assembly with pump and gauge from the fuel tank before draining the fuel. The removal process starts with disconnecting the fuel sender gauge assembly and the fuel pump through wire harness connector removal and breaking the fuel pump harness connector and fuel pump filter hose free. To separate the fuel pump sub-tank start by removing its E-ring and then unfastening its two claws. Keep the indicated tube in place while performing this operation. A screwdriver with taped tip should be used to release the 2 claws for No.1 fuel suction support removal followed by the 5 claw release for removing the fuel pump filter and fuel pump from the fuel filter while taking caution to protect the fuel pump filter and suction filter. Remove both fuel pump hardware connectors and remove the O-ring from the assembly. A protected-tape-wrapped screwdriver should be used to remove the fuel pressure regulator assembly by slowly pulling it from its fixed position because the O-ring between the regulator and fuel filter is firmly installed. Remove the two O-rings that are present on the regulator assembly.
Fuel Pressure Regulator
23280-21010
Q: How to install the fuel pressure regulator assembly on Toyota Corolla?
A:
The installation process of fuel pressure regulator assembly for 2ZR-FE requires applying gasoline to two new O-rings before placing them on the regulator assembly. After that install the Fuel Pressure Regulator Assembly. After the fuel pump install the system requires the driver to mount the fuel sender gauge assembly. The motorist must install both fuel suction tube assembly along with pump and gauge to the fuel tank next. You must check the fuel system for leakage before connecting the cable to the negative battery terminal.