How to service and repair the ball joint on Toyota Celica?

The ball joint servicing requires the detector specialist to start by removing the steering knuckle with attached axle hub followed by the lower ball joint removal through the process of taking out the cotter pin and nut with Special Service Tool: 09628-62011 to detach the lower ball joint. The lower ball joint assessment requires the ball joint stud to be rotated five times in opposite directions before nut installation. Then use a torque wrench to continually tighten the nut at a time duration of 2 - 4 seconds before measuring the final torque reading on the fifth turn. The proper torque range should be 1.0 - 4.9 Nm (10 - 50 kgf.cm, 8.7 - 43 inch lbs.). First install the lower ball joint before tightening its nut to 103 Nm (1,050 kgf.cm, 76 ft. lbs.) then insert a new cotter pin aligned through the holes and maintain this alignment by tightening the nut up to 60° if needed. Before reattaching the steering knuckle with axle hub and inspecting the ABS speed sensor signal employees should verify the front wheel alignment.

OEM Toyota Celica Ball Joint

Control Arm Joint

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

4 Ball Joints found

View related parts
Toyota Celica Ball Joint, Lower
Part Number: 43330-09230
$65.52 MSRP: $91.97
You Save: $26.45 (29%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Joint Assembly, Lower Ball; Suspension Ball Joint, Front; Lower Ball Joint; Front Passenger & Driver Side Assembly; Suspension Ball Joint
- Position: Lower
- Replaces: 43330-09070, 43330-49045
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
Fits the following Vehicles:
- 2000-2005 Toyota Celica | GT, GTS | 4 Cyl 1.8 L GAS
View related parts
Toyota Celica Ball Joint, Lower
Part Number: 43330-29375
$68.24 MSRP: $95.80
You Save: $27.56 (29%)
ADD TO CART
Product Specifications
- Other Name: Joint Assembly, Lower Ball; Suspension Ball Joint; Lower Ball Joint; Joint Assembly, Lower Ball, Front Passenger Side; Joint Assembly, Lower Ball, Front Driver Side
- Position: Lower
- Replaces: 43330-29315, 43330-09030, 43330-29265
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
Fits the following Vehicles:
- 1994-1999 Toyota Celica | GT, ST | 4 Cyl 1.8 L GAS, 4 Cyl 2.2 L GAS
View related parts
Toyota Celica Ball Joint, Lower
Part Number: 43330-29326
Product Specifications
- Other Name: Joint Assembly, Lower Ball; Suspension Ball Joint; Lower Ball Joint
- Position: Lower
- Replaces: 43330-29225, 43330-29325
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
Fits the following Vehicles:
- 1990-1993 Toyota Celica | All Trac, GT, GTS, GTS All Trac, ST | 4 Cyl 1.6 L GAS, 4 Cyl 2.0 L GAS, 4 Cyl 2.2 L GAS
View related parts
Toyota Celica Ball Joint, Lower
Part Number: 43330-29185
$69.07 MSRP: $96.96
You Save: $27.89 (29%)
Product Specifications
- Other Name: Joint Assembly, Lower Ball; Lower Ball Joint
- Position: Lower
- Replaces: 43330-29146
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
Fits the following Vehicles:
- 1986-1989 Toyota Celica | All Trac, GT, GTS, ST | 4 Cyl 2.0 L GAS

Toyota Celica Ball Joint

If you're thinking about purchasing OEM parts for your Toyota Celica, our website is your one-stop destination. We stock an extensive selection of genuine Toyota Celica Ball Joint at pocket-friendly prices. Plus, we guarantee a swift delivery and a hassle-free return policy for your convenience.

Toyota Celica Ball Joint Parts Questions & Experts Answers

Ball Joint, Lower
43330-09230
Q: How to service and repair the ball joint on Toyota Celica?
A: The ball joint servicing requires the detector specialist to start by removing the steering knuckle with attached axle hub followed by the lower ball joint removal through the process of taking out the cotter pin and nut with Special Service Tool: 09628-62011 to detach the lower ball joint. The lower ball joint assessment requires the ball joint stud to be rotated five times in opposite directions before nut installation. Then use a torque wrench to continually tighten the nut at a time duration of 2 - 4 seconds before measuring the final torque reading on the fifth turn. The proper torque range should be 1.0 - 4.9 Nm (10 - 50 kgf.cm, 8.7 - 43 inch lbs.). First install the lower ball joint before tightening its nut to 103 Nm (1,050 kgf.cm, 76 ft. lbs.) then insert a new cotter pin aligned through the holes and maintain this alignment by tightening the nut up to 60° if needed. Before reattaching the steering knuckle with axle hub and inspecting the ABS speed sensor signal employees should verify the front wheel alignment.