How to install the brake master cylinder on Toyota Avalon?

To install the brake master cylinder you need to install a fresh O-ring before positioning the brake master cylinder sub-assembly and front brake tube way using two nuts. The brake master cylinder sub-assembly and front brake tube way should be positioned in place using the 2 nuts while tightening them to reach 13 Nm (133 kgf-cm, 10 ft-lbf). The No. 1 front brake tube needs connection to the brake master cylinder sub-assembly. The six brake lines must be fastened to their respective ports with a union nut wrench (10 mm) maintaining 15 Nm (155 kgf-cm, 11 ft-lbf) without the wrench or 14 Nm (143 kgf-cm, 11 ft-lbf) with it while keeping the torque wrench parallel and with a 250 mm (9.84 in.) fulcrum. The connector should be attached before the clamp can be engaged. The brake fluid reservoir requires filling before performing cylinder master bleeding and subsequent line bleeding and actuator bleeding. Check for all brake fluid leakages before measuring the reservoir fluid level. Place the air cleaner cap onto its associated air cleaner hose for installation.

How to service and repair the Brake Master Cylinder on Toyota Avalon?

Start Brake Master Cylinder servicing and repair by first removing the air cleaner cover along with the air cleaner hose. A syringe should be used for fluid extraction while braking fluid must be cleaned from painted areas because you should wash off brake fluid immediately. Remove both the level warning switch connector as well as the reservoir hose when VSC is present. Special Service Tool: 09023-00100 allows users to safely disconnect the 4 brake lines from the master cylinder and 2-way through torque application at 15 Nm (155 kgf-cm, 11 ft. lbs.). Models equipped with VSC require the use of Special Service Tool: 09023-00100 to disconnect the 5 brake lines from the master cylinder and 3-way while tightening them at 15 Nm (155 kgf-cm, 11 ft. lbs.). To remove the master cylinder tighten the nuts holding the 2 mounting points before extracting both the 2 or 3-way master cylinder while also removing the gasket with a torque setting of 13 Nm (130 kgf-cm, 9 ft. lbs.). After reverse-following the disassembly steps the technician must adjust the brake booster push rod to optimal length before mastering the installation sequence. The brake installation process requires fluid addition to the brake tank alongside brake system bleeding before leakage inspection and brake pedal adjustment.

OEM Toyota Avalon Brake Master Cylinder

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

17 Brake Master Cylinders found

View related parts
Toyota Avalon Master Cylinder
Part Number: 47201-33130
$249.76 MSRP: $356.60
You Save: $106.84 (30%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Cylinder Sub-Assembly, Brake Stroke Simulator; Brake Master Cylinder; Brake Reservoir; Cylinder Sub-Assembly, Brake Master
- Replaces: 47201-07020
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
Fits the following Vehicles:
- 1995-1999 Toyota Avalon | XL, XLS | 6 Cyl 3.0 L GAS
View related parts
Toyota Avalon Master Cylinder
Part Number: 47201-06443
$230.08 MSRP: $328.49
You Save: $98.41 (30%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Cylinder Sub-Assembly, Brake Stroke Simulator; Brake Master Cylinder; Brake Reservoir; Cylinder Sub-Assembly, Brake Master
- Replaces: 47201-06440, 47201-06442
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
Fits the following Vehicles:
- 2013-2018 Toyota Avalon | Limited, Touring, XLE, XLE Plus, XLE Premium, XLE Touring, XLE Touring SE | 6 Cyl 3.5 L GAS
View related parts
Toyota Avalon Master Cylinder
Part Number: 47201-06423
$178.35 MSRP: $254.65
You Save: $76.30 (30%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Cylinder Sub-Assembly, Brake Stroke Simulator; Brake Master Cylinder; Brake Reservoir; Cylinder Sub-Assembly, Brake Master W/Plate
- Replaces: 47201-06422, 47028-06030, 47201-06420
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
Fits the following Vehicles:
- 2008-2012 Toyota Avalon | Base, Limited, Touring, XL, XLS | 6 Cyl 3.5 L GAS
View related parts
Toyota Avalon Master Cylinder
Part Number: 47201-07070
$232.76 MSRP: $332.32
You Save: $99.56 (30%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Cylinder Sub-Assembly, Brake Stroke Simulator; Brake Master Cylinder; Brake Reservoir
- Replaces: 47201-07051
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
Fits the following Vehicles:
- 2002-2004, 2000 Toyota Avalon | XL, XLS | 6 Cyl 3.0 L GAS
View related parts
Toyota Avalon Master Cylinder
Part Number: 47201-07053
$222.60 MSRP: $317.81
You Save: $95.21 (30%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Cylinder Sub-Assembly, Brake Stroke Simulator; Brake Master Cylinder; Brake Reservoir
- Replaces: 47201-07052
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
Fits the following Vehicles:
- 2001 Toyota Avalon | XL, XLS | 6 Cyl 3.0 L GAS
View related parts
Toyota Avalon Master Cylinder
Part Number: 47050-41020
$491.07 MSRP: $719.67
You Save: $228.60 (32%)
ADD TO CART
Product Specifications
- Other Name: Cylinder Assembly, Brake; Brake Master Cylinder; Brake Reservoir; Brake Booster Assembly, W/Master Cylinder
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
Fits the following Vehicles:
- 2015 Toyota Avalon | Hybrid Limited, Hybrid XLE Premium, Hybrid XLE Touring | 4 Cyl 2.5 L FULL HYBRID EV-GAS (FHEV)
View related parts
Toyota Avalon Master Cylinder
Part Number: 47050-41010
$491.07 MSRP: $719.67
You Save: $228.60 (32%)
ADD TO CART
Product Specifications
- Other Name: Cylinder Assembly, Brake; Brake Master Cylinder; Brake Booster; Brake Booster Assembly, W/Master Cylinder
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
Fits the following Vehicles:
- 2013-2014 Toyota Avalon | Hybrid Limited, Hybrid XLE | 4 Cyl 2.5 L FULL HYBRID EV-GAS (FHEV)
View related parts
Toyota Avalon Brake Booster
Part Number: 47050-41091
$1250.99 MSRP: $1833.33
You Save: $582.34 (32%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Cylinder Assembly, Brake; Booster Assembly; Brake Booster Assembly, W/Master Cylinder
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
Fits the following Vehicles:
- 2020-2022 Toyota Avalon | Hybrid Limited, Hybrid XLE, Hybrid XSE, Hybrid XSE Nightshade | 4 Cyl 2.5 L FULL HYBRID EV-GAS (FHEV)
View related parts
Toyota Avalon Brake Booster
Part Number: 47050-41040
$1259.73 MSRP: $1846.14
You Save: $586.41 (32%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Cylinder Assembly, Brake; Booster Assembly; Brake Booster Assembly, W/Master Cylinder
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
Fits the following Vehicles:
- 2019 Toyota Avalon | Hybrid Limited, Hybrid XLE, Hybrid XSE | 4 Cyl 2.5 L FULL HYBRID EV-GAS (FHEV)
View related parts
Toyota Avalon Master Cylinder
Part Number: 47050-41030
$491.07 MSRP: $719.67
You Save: $228.60 (32%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Cylinder Assembly, Brake; Brake Master Cylinder; Brake Booster; Brake Booster Assembly, W/Master Cylinder
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
Fits the following Vehicles:
- 2015-2018 Toyota Avalon | Hybrid Limited, Hybrid XLE Plus, Hybrid XLE Premium | 4 Cyl 2.5 L FULL HYBRID EV-GAS (FHEV)
View related parts
Toyota Avalon Master Cylinder
Part Number: 47201-07032
$229.14 MSRP: $327.17
You Save: $98.03 (30%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Cylinder Sub-Assembly, Brake Stroke Simulator; Brake Master Cylinder; Brake Reservoir; Cylinder Sub-Assembly, Brake Master
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
Fits the following Vehicles:
- 2001 Toyota Avalon | XL, XLS | 6 Cyl 3.0 L GAS
View related parts
Toyota Avalon Master Cylinder
Part Number: 47201-06510
$183.59 MSRP: $262.13
You Save: $78.54 (30%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Cylinder Sub-Assembly, Brake Stroke Simulator; Brake Master Cylinder; Brake Reservoir; Master Cylinder Assembly; Cylinder Sub-Assembly, Brake Master
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
Fits the following Vehicles:
- 2019-2022 Toyota Avalon | Limited, Touring, TRD, XLE, XSE, XSE Nightshade | 6 Cyl 3.5 L GAS
View related parts
Toyota Avalon Master Cylinder
Part Number: 47028-07010
$280.87 MSRP: $401.02
You Save: $120.15 (30%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Cylinder Sub-Assembly, Brake Stroke Simulator; Brake Master Cylinder; Brake Reservoir; Cylinder Sub-Assembly, Brake Master W/Plate
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
Fits the following Vehicles:
- 2005-2007 Toyota Avalon | Limited, Touring, XL, XLS | 6 Cyl 3.5 L GAS
View related parts
Toyota Avalon Brake Booster
Part Number: 47050-41100
$1387.19 MSRP: $2032.94
You Save: $645.75 (32%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Cylinder Assembly, Brake; Brake Booster Assembly, W/Master Cylinder
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
Fits the following Vehicles:
- 2022 Toyota Avalon | Hybrid Limited, Hybrid XLE, Hybrid XSE Nightshade | 4 Cyl 2.5 L FULL HYBRID EV-GAS (FHEV)
View related parts
Toyota Avalon Master Cylinder
Part Number: 47201-33110
Product Specifications
- Other Name: Cylinder Sub-Assembly, Brake Stroke Simulator; Brake Master Cylinder; Brake Reservoir; Cylinder Sub-Assembly, Brake Master
- Replaces: 47201-07010
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
Fits the following Vehicles:
- 1995-1999 Toyota Avalon | XL, XLS | 6 Cyl 3.0 L GAS
View related parts
Toyota Avalon Cylinder Sub-Assembly, Brake Master
Part Number: 47201-33100
Product Specifications
- Other Name: Cylinder Sub-Assembly, Brake Stroke Simulator; Brake Master Cylinder; Brake Reservoir
- Manufacturer Note: W(TRACTION CONTROL)
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
Fits the following Vehicles:
- 1997-1999 Toyota Avalon | XL, XLS | 6 Cyl 3.0 L GAS
View related parts
Toyota Avalon Master Cylinder
Part Number: 47201-07031
Product Specifications
- Other Name: Cylinder Sub-Assembly, Brake Stroke Simulator; Brake Master Cylinder; Brake Reservoir; Cylinder Sub-Assembly, Brake Master
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
Fits the following Vehicles:
- 2002-2004, 2000 Toyota Avalon | XL, XLS | 6 Cyl 3.0 L GAS

Toyota Avalon Brake Master Cylinder

Choose genuine Brake Master Cylinder that pass strict quality control tests. You can trust the top quality and lasting durability. Shopping for OEM Brake Master Cylinder for your Toyota Avalon? Our website is your one-stop destination. We stock an extensive selection of genuine Toyota Avalon parts. The price is affordable so you can save more. It only takes minutes to browse and find the exact fit. Easily add to cart and check out fast. Our hassle-free return policy will keep you stress-free. We process orders quickly for swift delivery. Your parts will arrive faster, so you can get back on the road sooner.

The Brake Master Cylinder used in Toyota Avalon cars is an essential part of the braking structure since it transmits the pressure that the driver adds into hydraulic pressure. These hydraulic pressure is then transferred to the slave cylinders that msgage the brakes and thus produce the friction that is needed to stop the car. Generally the master cylinder has pistons, seals, and springs which are enclosed in cast iron or aluminum and the fluid reservoirs may be incorporated or separated. In the different Toyota Avalon models, the constructors have incorporated the dual circuit master cylinders; this is because even if a particular circuit is damaged, the car can still be braked via the other circuit. This design improves safety by providing the capability of continued operations in the instance of hydraulic system failure. Problems range from leakage of the fluid to internal failures that will reduce the effectiveness of the Brake Master Cylinder. It should be noted that cavities of cylinders should be maintained in proper fashion because of presence of moisture and corrosion, which can reduce admissible loads.

Toyota Avalon Brake Master Cylinder Parts and Q&A

Master Cylinder
47201-06423
Q: How to install the brake master cylinder on Toyota Avalon?
A:
To install the brake master cylinder you need to install a fresh O-ring before positioning the brake master cylinder sub-assembly and front brake tube way using two nuts. The brake master cylinder sub-assembly and front brake tube way should be positioned in place using the 2 nuts while tightening them to reach 13 Nm (133 kgf-cm, 10 ft-lbf). The No. 1 front brake tube needs connection to the brake master cylinder sub-assembly. The six brake lines must be fastened to their respective ports with a union nut wrench (10 mm) maintaining 15 Nm (155 kgf-cm, 11 ft-lbf) without the wrench or 14 Nm (143 kgf-cm, 11 ft-lbf) with it while keeping the torque wrench parallel and with a 250 mm (9.84 in.) fulcrum. The connector should be attached before the clamp can be engaged. The brake fluid reservoir requires filling before performing cylinder master bleeding and subsequent line bleeding and actuator bleeding. Check for all brake fluid leakages before measuring the reservoir fluid level. Place the air cleaner cap onto its associated air cleaner hose for installation.
Master Cylinder
47201-07070
Q: How to service and repair the Brake Master Cylinder on Toyota Avalon?
A:
Start Brake Master Cylinder servicing and repair by first removing the air cleaner cover along with the air cleaner hose. A syringe should be used for fluid extraction while braking fluid must be cleaned from painted areas because you should wash off brake fluid immediately. Remove both the level warning switch connector as well as the reservoir hose when VSC is present. Special Service Tool: 09023-00100 allows users to safely disconnect the 4 brake lines from the master cylinder and 2-way through torque application at 15 Nm (155 kgf-cm, 11 ft. lbs.). Models equipped with VSC require the use of Special Service Tool: 09023-00100 to disconnect the 5 brake lines from the master cylinder and 3-way while tightening them at 15 Nm (155 kgf-cm, 11 ft. lbs.). To remove the master cylinder tighten the nuts holding the 2 mounting points before extracting both the 2 or 3-way master cylinder while also removing the gasket with a torque setting of 13 Nm (130 kgf-cm, 9 ft. lbs.). After reverse-following the disassembly steps the technician must adjust the brake booster push rod to optimal length before mastering the installation sequence. The brake installation process requires fluid addition to the brake tank alongside brake system bleeding before leakage inspection and brake pedal adjustment.