How to remove the Air Injection Pump on Toyota 4Runner?

A proper removal of the Air Injection Pump begins with fuel system pressure discharge and engine coolant drainage. First detach the throttle body cover sub-assembly, then proceed with removing the air cleaner hose assembly. Disconnect the fuel hose and the fuel No. 2 hose followed by disconnecting the intake manifold connectors which will allow the hoses to be easily removed. Next the installer needs to take out the water by-pass pipe sub-assembly and the intake manifold assembly. Users must detach three components from the air pump assembly with bracket: No.2 air hose from the air switching valve and from the air switching valve connector and from the pressure sensor connector for the air injection system before removing all 4 securing bolts. To disassemble the air pump assembly first remove all 3 bolts and then take out the air pump assembly followed by the removal of its 3 insulators.

OEM Toyota 4Runner Air Injection Pump

SAI Pump

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

5 Air Injection Pumps found

View related parts
Toyota 4Runner Air Pump
Part Number: 17610-0C040
$464.77 MSRP: $681.13
You Save: $216.36 (32%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Pump Assembly, Air; Secondary Air Injection Pump; A.I.R. Pump
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
Fits the following Vehicles:
- 2010 Toyota 4Runner | SR5 | 4 Cyl 2.7 L GAS
View related parts
Toyota 4Runner Air Pump
Part Number: 17610-0C030
$482.59 MSRP: $707.25
You Save: $224.66 (32%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Pump Assembly, Air; Secondary Air Injection Pump; A.I.R. Pump
- Manufacturer Note: MEXICO SPEC
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
Fits the following Vehicles:
- 2013-2023 Toyota 4Runner | 40th Anniversary Edition, Limited, Nightshade, SR5, SR5 Premium, Trail, TRD Off-Road, TRD Off-Road Premium, TRD Pro, TRD Sport, Venture | 6 Cyl 4.0 L GAS
View related parts
Toyota 4Runner Pump Assembly, Air, Driver Side
Part Number: 17600-0F010
$456.26 MSRP: $668.65
You Save: $212.39 (32%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Pump Assembly, Air W/Bra; Secondary Air Injection Pump
- Position: Driver Side
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
Fits the following Vehicles:
- 2005-2009 Toyota 4Runner | Limited, Sport, SR5 | 8 Cyl 4.7 L GAS
View related parts
Toyota 4Runner A.I.R. Pump
Part Number: 17610-35020
Product Specifications
- Other Name: Pump Assembly, Air; Secondary Air Injection Pump
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
Fits the following Vehicles:
- 1988-1990 Toyota 4Runner | DLX, SR5 | 4 Cyl 2.4 L GAS, 6 Cyl 3.0 L GAS
View related parts
Toyota 4Runner A.I.R. Pump
Part Number: 17610-35010
Product Specifications
- Other Name: Pump Assembly, Air; Secondary Air Injection Pump
- Manufacturer Note: CALIFORNIA SPEC
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
Fits the following Vehicles:
- 1984-1987 Toyota 4Runner | DLX, SR5 | 4 Cyl 2.4 L GAS

Toyota 4Runner Air Injection Pump

If you're thinking about purchasing OEM parts for your Toyota 4Runner, our website is your one-stop destination. We stock an extensive selection of genuine Toyota 4Runner Air Injection Pump at pocket-friendly prices. Plus, we guarantee a swift delivery and a hassle-free return policy for your convenience.

Toyota 4Runner Air Injection Pump Parts Questions & Experts Answers

Pump Assembly, Air, Driver Side
17600-0F010
Q: How to remove the Air Injection Pump on Toyota 4Runner?
A: A proper removal of the Air Injection Pump begins with fuel system pressure discharge and engine coolant drainage. First detach the throttle body cover sub-assembly, then proceed with removing the air cleaner hose assembly. Disconnect the fuel hose and the fuel No. 2 hose followed by disconnecting the intake manifold connectors which will allow the hoses to be easily removed. Next the installer needs to take out the water by-pass pipe sub-assembly and the intake manifold assembly. Users must detach three components from the air pump assembly with bracket: No.2 air hose from the air switching valve and from the air switching valve connector and from the pressure sensor connector for the air injection system before removing all 4 securing bolts. To disassemble the air pump assembly first remove all 3 bolts and then take out the air pump assembly followed by the removal of its 3 insulators.