OEM Scion tC Oil Filter

Scion tC Oil Filter Parts Questions & Experts Answers

• Oil Filter
  90915-YZZF1
  Q: How to replace the oil filter on Scion tC?

  A: Carefully beginning the oil filter installation requires protection against extended engine oil exposure since both skin irritation and dangerous pollutants exist in the substance. Use protective gloves and clothing during the operation as well as immediate washing of your skin after contact. The proper disposal sites exist for used oil and filters. You should start by removing the engine under cover RH and drain engine oil by removing the oil filler cap and the oil drain plug into a container. You should now uninstall the oil filter sub-assembly with Special Service Tool: 09228-06501 available. First clean the oil filter surface then apply engine oil to the new filter gasket before hand-tightening it until the gasket meets the seat. Install the oil filter using the Special Service Tool designated as 09228-06501. Use either a torque wrench to reach 17.2 Nm (175 kgf-cm, 13 ft. lbs.); alternatively users can tighten the oil filter by hand or using a common wrench for three-fourths turn. You must first clean then install the new gasket on the oil drain plug before tightening it to 40 Nm (408 kgf-cm, 30 ft. lbs.). Next, pour new oil by the standard capacity before installing the oil filler cap. To finish the maintenance check the engine for any leaking oil before installing the right-hand under cover back on.