×
ToyotaParts- Hello
- Login or Register
- Quick Links
- Live Chat
- Track Order
- Parts Availability
- RMA
- Help Center
- Contact Us
- Shop for
- Toyota Parts
- Scion Parts
My Garage
My Account
Cart
OEM Scion tC Alternator
Generator- Select Vehicle by Model
- Select Vehicle by VIN
Select Vehicle by Model
orMake
Model
Year
Select Vehicle by VIN
For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).
3 Alternators found
Scion tC Alternator
Part Number: 27060-36011$387.36 MSRP: $567.68You Save: $180.32 (32%)Ships in 1-3 Business Days
Scion tC Alternator
Part Number: 27060-28350-84$171.10 MSRP: $225.44You Save: $54.34 (25%)Ships in 1-3 Business Days
Scion tC Alternator
Part Number: 27060-28270-84$214.33 MSRP: $285.34You Save: $71.01 (25%)Ships in 1-3 Business Days
Scion tC Alternator
If you're thinking about purchasing OEM parts for your Scion tC, our website is your one-stop destination. We stock an extensive selection of genuine Scion tC Alternator at pocket-friendly prices. Plus, we guarantee a swift delivery and a hassle-free return policy for your convenience.
Scion tC Alternator Parts Questions & Experts Answers
- Q: How to install the alternator assembly on Scion tC?A: The installation of the 2AZ-FE charging system generator assembly starts with attaching the wire harness clamp bracket through a 8.4 Nm (85 kgf-cm, 74 in-lbf) torqued bolt. Connect the Crankshaft Position Sensor wire harness properly to the wire harness clamp bracket which exists at the ribbed back of the timing chain cover. The generator needs to be put into place with bolt A set at 21 Nm (215 kgf-cm, 16 ft-lbf) torque value to match bolt A and bolt B at 52 Nm (530 kgf-cm, 38 ft-lbf) torque value. Affix the two wire harness clamps then join the generator wire using a nut tightened to 9.8 Nm (100 kgf-cm, 7 ft-lbf). Install the terminal cap after which connect the generator connector then install the fan and generator V belt. You should install the front fender apron seal by attaching it to three clips and two screws. Before removing the cable from the negative terminal users must initialize the system while strict system requirements urge a complete disconnect and reconnect of the cable at the negative terminal.
