How to install the Canister Purge Valve on 2010 Toyota Yaris?

The first step to install a Canister Purge Valve for 1NZ-FE emission control involves placing the purge VSV then engaging the clip to the purge VSV connector. Follow the sequence by first attaching fuel vapor feed hose number 2 then number 1. The cable installation requires attachment to the negative battery terminal with a torque setting of 5.4 Nm (55 kgf-cm, 48 in-lbf).

OEM 2010 Toyota Yaris Canister Purge Valve

Vapor Canister Purge Valve EVAP

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

1 Canister Purge Valve found

View related parts
2010 Toyota Yaris Vacuum Switch
Part Number: 25860-21090
$89.49 MSRP: $125.62
You Save: $36.13 (29%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Valve Assembly, Vacuum Switching; Vapor Canister Purge Solenoid; Air Injection Check Valve; Delay Valve; Vacuum Valve; Valve
- Item Weight: 0.70 Pounds
- Item Dimensions: 3.5 x 3.3 x 2.4 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 25860-21090
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
More Info
Fits the following 2010 Toyota Yaris Submodels:
- Base, L, LE, S, SE | 4 Cyl 1.5 L GAS

2010 Toyota Yaris Canister Purge Valve

Looking for affordable OEM 2010 Toyota Yaris Canister Purge Valve? Explore our comprehensive catalogue of genuine 2010 Toyota Yaris Canister Purge Valve. All our parts are covered by the manufacturer's warranty. Plus, our straightforward return policy and speedy delivery service ensure an unparalleled shopping experience. We look forward to your visit!

2010 Toyota Yaris Parts Questions & Experts Answers

Q: How to install the Canister Purge Valve on 2010 Toyota Yaris?
A: The first step to install a Canister Purge Valve for 1NZ-FE emission control involves placing the purge VSV then engaging the clip to the purge VSV connector. Follow the sequence by first attaching fuel vapor feed hose number 2 then number 1. The cable installation requires attachment to the negative battery terminal with a torque setting of 5.4 Nm (55 kgf-cm, 48 in-lbf).