How to install a Yaw Sensor on 2010 Scion xD?

You should start sensor installation by securing two bolts that require a torque of 14 Nm (143 kgf-cm, 10 ft-lbf) followed by sensor connector connection. The yaw rate and acceleration sensor protector needs installation with 2 nuts at 9.0 Nm (92 kgf-cm, 80 in-lbf) torque setting. Reposition the rear console box cover after its installation. Secure the cable to the negative battery terminal where the torque must be set to 5.4 Nm (55 kgf-cm, 48 in-lbf). The last stage consists of performing calibration for the yaw rate and acceleration sensors together with a VSC sensor signal test.

OEM 2010 Scion xD Yaw Sensor

Yaw Rate Sensor

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

1 Yaw Sensor found

View related parts
2010 Scion xD Yaw Rate Sensor
Part Number: 89180-52050
$872.00 MSRP: $1277.93
You Save: $405.93 (32%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Sensor Assembly, Yawrate; Suspension Yaw Sensor; Yaw Sensor; Sensor, Yawrate
- Item Weight: 0.70 Pounds
- Item Dimensions: 5.4 x 4.1 x 3.0 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 89180-52050
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
More Info
Fits the following 2010 Scion xD Submodels:
- Base | 4 Cyl 1.8 L GAS

2010 Scion xD Yaw Sensor

Looking for affordable OEM 2010 Scion xD Yaw Sensor? Explore our comprehensive catalogue of genuine 2010 Scion xD Yaw Sensor. All our parts are covered by the manufacturer's warranty. Plus, our straightforward return policy and speedy delivery service ensure an unparalleled shopping experience. We look forward to your visit!

2010 Scion xD Parts Questions & Experts Answers

Q: How to install a Yaw Sensor on 2010 Scion xD?
A: You should start sensor installation by securing two bolts that require a torque of 14 Nm (143 kgf-cm, 10 ft-lbf) followed by sensor connector connection. The yaw rate and acceleration sensor protector needs installation with 2 nuts at 9.0 Nm (92 kgf-cm, 80 in-lbf) torque setting. Reposition the rear console box cover after its installation. Secure the cable to the negative battery terminal where the torque must be set to 5.4 Nm (55 kgf-cm, 48 in-lbf). The last stage consists of performing calibration for the yaw rate and acceleration sensors together with a VSC sensor signal test.