How to install the Clutch Slave Cylinder assembly on 2010 Scion xB?

You must fasten the clutch release cylinder assembly using its two bolts which should be tightened at 12 Nm (120 kgf-cm, 9 ft-lbf). First, tighten the flexible hose tube to the clutch release cylinder by using 15 Nm torque for those without a union nut wrench and by using 14 Nm torque for those who do have the wrench. The correct torque values need to be reached using a 300 mm (11.8 in.) torque wrench with a 22 mm (0.886 in.) union nut wrench which must remain parallel to the torque wrench. The clutch accumulator assembly requires installation as the last step.

OEM 2010 Scion xB Clutch Slave Cylinder

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

1 Clutch Slave Cylinder found

View related parts
2010 Scion xB Slave Cylinder
Part Number: 31470-42040
$84.50 MSRP: $118.61
You Save: $34.11 (29%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Cylinder Assembly, Clutch Release With Bearing; Clutch Slave Cylinder; Cylinder Assembly, Clutch Release
- Part Name Code: 31470
- Item Weight: 1.60 Pounds
- Item Dimensions: 4.8 x 4.2 x 3.0 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 31470-42040
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
More Info
Fits the following 2010 Scion xB Submodels:
- Base | 4 Cyl 2.4 L GAS

2010 Scion xB Clutch Slave Cylinder

Looking for affordable OEM 2010 Scion xB Clutch Slave Cylinder? Explore our comprehensive catalogue of genuine 2010 Scion xB Clutch Slave Cylinder. All our parts are covered by the manufacturer's warranty. Plus, our straightforward return policy and speedy delivery service ensure an unparalleled shopping experience. We look forward to your visit!

2010 Scion xB Parts Questions & Experts Answers

Q: How to install the Clutch Slave Cylinder assembly on 2010 Scion xB?
A: You must fasten the clutch release cylinder assembly using its two bolts which should be tightened at 12 Nm (120 kgf-cm, 9 ft-lbf). First, tighten the flexible hose tube to the clutch release cylinder by using 15 Nm torque for those without a union nut wrench and by using 14 Nm torque for those who do have the wrench. The correct torque values need to be reached using a 300 mm (11.8 in.) torque wrench with a 22 mm (0.886 in.) union nut wrench which must remain parallel to the torque wrench. The clutch accumulator assembly requires installation as the last step.