How to install the thermostat on 2010 Scion tC?

When installing the 2AZ-FE cooling system thermostat begin by placing a new gasket onto the component and positioning the jiggle valve upward facing in a range of 10 degrees on either side of its intended position. You must install the water inlet with the two nuts while ensuring a torque between 9.0 Nm and 92 kgf-cm or 80 in-lbf. The engine requires you to add coolant before you should check for any leakage after the installation.

OEM 2010 Scion tC Thermostat

Engine Coolant Thermostat

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

1 Thermostat found

View related parts
2010 Scion tC Thermostat
Part Number: 90916-03136
$26.28 MSRP: $36.57
You Save: $10.29 (29%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Engine Coolant Thermostat
- Replaces: 90916-C3001
- Part Name Code: 16331A
- Item Weight: 0.70 Pounds
- Item Dimensions: 2.3 x 0.9 x 2.0 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 90916-03136
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
More Info
Fits the following 2010 Scion tC Submodels:
- Base, Spec | 4 Cyl 2.4 L GAS

2010 Scion tC Thermostat

Looking for affordable OEM 2010 Scion tC Thermostat? Explore our comprehensive catalogue of genuine 2010 Scion tC Thermostat. All our parts are covered by the manufacturer's warranty. Plus, our straightforward return policy and speedy delivery service ensure an unparalleled shopping experience. We look forward to your visit!

2010 Scion tC Parts Questions & Experts Answers

Q: How to install the thermostat on 2010 Scion tC?
A: When installing the 2AZ-FE cooling system thermostat begin by placing a new gasket onto the component and positioning the jiggle valve upward facing in a range of 10 degrees on either side of its intended position. You must install the water inlet with the two nuts while ensuring a torque between 9.0 Nm and 92 kgf-cm or 80 in-lbf. The engine requires you to add coolant before you should check for any leakage after the installation.

Related 2010 Scion tC Parts

Alternate Year Models

2009 Scion tC Thermostat 2011 Scion tC Thermostat