How to install the thermostat on Scion tC?

When installing the 2AZ-FE cooling system thermostat begin by placing a new gasket onto the component and positioning the jiggle valve upward facing in a range of 10 degrees on either side of its intended position. You must install the water inlet with the two nuts while ensuring a torque between 9.0 Nm and 92 kgf-cm or 80 in-lbf. The engine requires you to add coolant before you should check for any leakage after the installation.

How to replace the thermostat on Scion tC?

Draining engine coolant must be the first step when replacing the 2AZ-FE thermostat. The water inlet needs removal after unscrewing the 2 nuts to release it from the cylinder block. Position the thermostat with its jiggle valve aimed upward after seaming a new gasket against it while maintaining a placement within 10 degrees of the recommended location on both sides. Reinstall the water inlet by tightening it to 9.0 Nm (92 kgf-cm, 80 inch lbs.). Last step is to put in engine coolant while inspecting for fluid leaks.

OEM Scion tC Thermostat

Engine Coolant Thermostat

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

2 Thermostats found

View related parts
Scion tC Thermostat
Part Number: 90916-03136
$28.19 MSRP: $39.24
You Save: $11.05 (29%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Engine Coolant Thermostat
- Replaces: 90916-C3001
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
Fits the following Vehicles:
- 2005-2010 Scion tC | Base, Spec | 4 Cyl 2.4 L GAS
View related parts
Scion tC Water Inlet
Part Number: 90916-A3003
$22.69 MSRP: $31.59
You Save: $8.90 (29%)
Product Specifications
- Other Name: Thermostat; Engine Coolant Thermostat; Thermostat, Coolant
- Replaces: 90916-03129, 90916-03084
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
Fits the following Vehicles:
- 2011-2016, 2005 Scion tC | Base | 4 Cyl 2.4 L GAS, 4 Cyl 2.5 L GAS

Scion tC Thermostat

Choose genuine Thermostat that pass strict quality control tests. You can trust the top quality and lasting durability. Shopping for OEM Thermostat for your Scion tC? Our website is your one-stop destination. We stock an extensive selection of genuine Scion tC parts. The price is affordable so you can save more. It only takes minutes to browse and find the exact fit. Easily add to cart and check out fast. Our hassle-free return policy will keep you stress-free. We process orders quickly for swift delivery. Your parts will arrive faster, so you can get back on the road sooner.

scion tc thermostat is among the cooling components in scion tc vehicles which are reputed for their reliability and performance. Located at the strategic place close to the radiator, the thermostat is a very important part of the car mainly due to its work on maintaining the engine temperature within the appropriate limits that are ideal for Scion tC performance as well as safety. This closed-loop control device is well suited to regulate the flow of heat transfer fluids turning the heating or cooling system on or off. Different styles of thermostats have been incorporated in different models of Scion tC, for instance top quality wax pellet thermostats that are self-actuated in terms of temperature fluctuations. Also there has been advancement in thermostat that has improved in functionality and enhanced the Scion tC's performance thus improving the efficiency of the car. This way, the Scion tC Thermostat fits in a compatible manner with various tC models thus enabling the driver to always ride in a car with the specific tC Thermostat model from the various years and trims without necessarily worrying about the compatibility issue. Specifically, the Scion tC has been known to be cheap and chic, thus, ideal for the young drivers. Additional features which can be incorporated in the thermostat design makes it unique in the automotive market to improve on the performance as well as the life cycle of the engine. In conclusion, the design and functionality of the Scion tC Thermostat prove the dedication of Scion to creating and investing in a well-safe, efficient compact car, which has earned the Scion tC a place in car-goers' hearts.

Scion tC Thermostat Parts and Q&A

Thermostat
90916-03136
Q: How to install the thermostat on Scion tC?
A:
When installing the 2AZ-FE cooling system thermostat begin by placing a new gasket onto the component and positioning the jiggle valve upward facing in a range of 10 degrees on either side of its intended position. You must install the water inlet with the two nuts while ensuring a torque between 9.0 Nm and 92 kgf-cm or 80 in-lbf. The engine requires you to add coolant before you should check for any leakage after the installation.
Water Inlet
90916-A3003
Q: How to replace the thermostat on Scion tC?
A:
Draining engine coolant must be the first step when replacing the 2AZ-FE thermostat. The water inlet needs removal after unscrewing the 2 nuts to release it from the cylinder block. Position the thermostat with its jiggle valve aimed upward after seaming a new gasket against it while maintaining a placement within 10 degrees of the recommended location on both sides. Reinstall the water inlet by tightening it to 9.0 Nm (92 kgf-cm, 80 inch lbs.). Last step is to put in engine coolant while inspecting for fluid leaks.