Other Name: Sensor, Speed, Front Left-Hand; ABS Wheel Speed Sensor, Front Left; Front Speed Sensor; Sensor, Speed, Front Driver Side; ABS Wheel Speed Sensor
Position: Front Driver Side
Part Name Code: 89543
Item Weight: 0.90 Pounds
Item Dimensions: 10.0 x 6.7 x 2.2 inches
Condition: New
Fitment Type: Direct Replacement
SKU: 89543-20170
Warranty: This genuine part is guaranteed by Toyota's
factory warranty.
Other Name: Sensor, Speed, Front Right-Hand; ABS Wheel Speed Sensor, Front Right; Front Speed Sensor; Sensor, Speed, Front Passenger Side; ABS Wheel Speed Sensor
Position: Front Passenger Side
Part Name Code: 89542
Item Weight: 0.90 Pounds
Item Dimensions: 10.0 x 6.6 x 2.1 inches
Condition: New
Fitment Type: Direct Replacement
SKU: 89542-20170
Warranty: This genuine part is guaranteed by Toyota's
factory warranty.
More Info
Fits the following 2010 Scion tC Submodels:
Base, Spec | 4 Cyl 2.4 L GAS
2010 Scion tC Speed Sensor
Looking for affordable OEM 2010 Scion tC Speed Sensor? Explore our comprehensive catalogue of genuine 2010 Scion tC Speed Sensor. All our parts are covered by the manufacturer's warranty. Plus, our straightforward return policy and speedy delivery service ensure an unparalleled shopping experience. We look forward to your visit!
2010 Scion tC Parts Questions & Experts Answers
Q: How to install the front speed sensor on the LH side on 2010 Scion tC?
A: You should start by attaching the front speed sensor with a bolt that needs a torque setting of 9.0 Nm (92 kgf-cm, 80 in-lbf). The installation hole along with the sensor tip needs to remain free from any foreign debris. Use two bolts to activate the speed sensor on the body frame at specified values where 9.0 Nm (92 kgf-cm, 80 in-lbf) for bolt A and 29 Nm (296 kgf-cm, 21 ft-lbf) for bolt B. Afterwards, connect the connector and clamp the sensor in position. Install the LH front fender liner followed by the front wheel with necessary torque settings reaching 103 Nm (1,050 kgf-cm, 76 ft-lbf). Some systems demand system initialization once the negative battery terminal cable connection resumes. Check the ABS speed sensor signal to validate correct operation in the last step.