How to remove the power door lock actuator on 2010 Scion tC?

The first step to remove the power door lock actuator requires disconnecting battery negative terminal cable followed by waiting at least 90 seconds to deactivate Air Bag and seat belt pretensioners. The first step requires removal of the assist grip cover LH followed by the power window regulator master switch assembly on the driver side and next is the door control switch assembly on the passenger side. After disconnecting the front door trim board sub-assembly you must also remove the front door inside handle sub-assembly together with the front door service hole cover. You should now proceed to take off the front door frame sub-assembly rear lower and the front door outside handle cover. You must take out the front door lock assembly as the final step. Both LH and RH sides must receive identical procedures and the standard bolt chart contains a bolt entry when torque values are not specified.

OEM 2010 Scion tC Door Lock Actuator

Power Door Lock Actuator

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

3 Door Lock Actuators found

View related parts
2010 Scion tC Lock Assembly, Rear
Part Number: 69350-21110
$215.63 MSRP: $307.87
You Save: $92.24 (30%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Lock Assembly, Back Door; Liftgate Latch, Rear; Trunk Lock Actuator Motor; Door Lock Actuator; Door Lock; Lock; Lock Assembly, Back Door, W/Courtesy Lamp Switch
- Position: Rear
- Part Name Code: 69350P
- Item Weight: 1.60 Pounds
- Item Dimensions: 17.0 x 12.0 x 3.1 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 69350-21110
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
More Info
Fits the following 2010 Scion tC Submodels:
- Base, Spec | 4 Cyl 2.4 L GAS
View related parts
2010 Scion tC Lock Actuator, Driver Side
Part Number: 69040-02120
$246.04 MSRP: $351.28
You Save: $105.24 (30%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Lock Assembly, Front Door W; Door Latch Assembly, Front Left; Door Lock Actuator Motor; Door Lock Actuator; Door Lock; Lock Assembly; Control Sub-Assembly, Door Lock Remote, Driver Side; Front Door Lock Assembly
- Manufacturer Note: W(POWER DOOR LOCK)
- Position: Driver Side
- Replaces: 69040-33221
- Item Weight: 2.10 Pounds
- Item Dimensions: 8.0 x 5.5 x 5.6 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 69040-02120
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
More Info
Fits the following 2010 Scion tC Submodels:
- Base, Spec | 4 Cyl 2.4 L GAS
View related parts
2010 Scion tC Lock Actuator, Passenger Side
Part Number: 69030-02130
$246.04 MSRP: $351.28
You Save: $105.24 (30%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Lock Assembly, Front Door W; Door Latch Assembly, Front Right; Door Lock Actuator Motor; Door Lock Actuator; Door Lock; Lock Assembly; Front Door W/Motor, Passenger Side; Door Latch Assembly
- Manufacturer Note: W(POWER DOOR LOCK)
- Position: Passenger Side
- Replaces: 69030-33221
- Item Weight: 1.50 Pounds
- Item Dimensions: 8.3 x 5.6 x 5.8 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 69030-02130
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
More Info
Fits the following 2010 Scion tC Submodels:
- Base, Spec | 4 Cyl 2.4 L GAS

2010 Scion tC Door Lock Actuator

Looking for affordable OEM 2010 Scion tC Door Lock Actuator? Explore our comprehensive catalogue of genuine 2010 Scion tC Door Lock Actuator. All our parts are covered by the manufacturer's warranty. Plus, our straightforward return policy and speedy delivery service ensure an unparalleled shopping experience. We look forward to your visit!

2010 Scion tC Parts Questions & Experts Answers

Q: How to remove the power door lock actuator on 2010 Scion tC?
A: The first step to remove the power door lock actuator requires disconnecting battery negative terminal cable followed by waiting at least 90 seconds to deactivate Air Bag and seat belt pretensioners. The first step requires removal of the assist grip cover LH followed by the power window regulator master switch assembly on the driver side and next is the door control switch assembly on the passenger side. After disconnecting the front door trim board sub-assembly you must also remove the front door inside handle sub-assembly together with the front door service hole cover. You should now proceed to take off the front door frame sub-assembly rear lower and the front door outside handle cover. You must take out the front door lock assembly as the final step. Both LH and RH sides must receive identical procedures and the standard bolt chart contains a bolt entry when torque values are not specified.