×
ToyotaParts- Hello
- Login or Register
- Quick Links
- Live Chat
- Track Order
- Parts Availability
- RMA
- Help Center
- Contact Us
- Shop for
- Toyota Parts
- Scion Parts
My Garage
My Account
Cart
OEM 2009 Toyota Venza Suspension Strut Rod
- Select Vehicle by Model
- Select Vehicle by VIN
Select Vehicle by Model
orMake
Model
Year
Select Vehicle by VIN
For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).
2 Suspension Strut Rods found
2009 Toyota Venza Trailing Arm, Rear
Part Number: 48780-48081$129.71 MSRP: $183.62You Save: $53.91 (30%)Ships in 1-3 Business DaysProduct Specifications- Other Name: Rod Assembly, Strut, Rear; Suspension Trailing Arm, Rear; Suspension Strut Rod; Torque Arm; Strut Rod; Suspension Trailing Arm
- Position: Rear
- Replaces: 48780-48080
- Part Name Code: 48780A
- Item Weight: 3.30 Pounds
- Item Dimensions: 23.4 x 2.9 x 2.8 inches
- Condition: New
- Fitment Type: Direct Replacement
- Require Quantity: 2
- SKU: 48780-48081
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
2009 Toyota Venza Trailing Arm, Rear
Part Number: 48780-48070$110.90 MSRP: $155.67You Save: $44.77 (29%)Ships in 1-3 Business DaysProduct Specifications- Other Name: Rod Assembly, Strut, Rear; Suspension Trailing Arm, Rear; Suspension Strut Rod; Torque Arm; Strut Rod; Suspension Trailing Arm
- Position: Rear
- Replaces: 48780-48100
- Part Name Code: 48780A
- Item Weight: 3.00 Pounds
- Item Dimensions: 23.4 x 2.9 x 3.0 inches
- Condition: New
- Fitment Type: Direct Replacement
- Require Quantity: 2
- SKU: 48780-48070
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
2009 Toyota Venza Suspension Strut Rod
Looking for affordable OEM 2009 Toyota Venza Suspension Strut Rod? Explore our comprehensive catalogue of genuine 2009 Toyota Venza Suspension Strut Rod. All our parts are covered by the manufacturer's warranty. Plus, our straightforward return policy and speedy delivery service ensure an unparalleled shopping experience. We look forward to your visit!
2009 Toyota Venza Suspension Strut Rod Parts Q&A
- Q: How to install the rear Suspension Strut Rod assembly for 2WD and AWD on 2009 Toyota Venza?A: Secure the rear strut rod assembly to the rear axle carrier sub-assembly temporarily by using bolt and nut installation. Do this while making sure the identification mark stays inside the vehicle and gently fastening the bolt because of the stopper nut. Position the assembly at the tightening 9 degrees 54' (9.9) angle and set the bolt 83.9 millimeters away from the stopping point before tightening it to reach 80 Nm (816 kgf-cm, 59ft-lbf). Temporarily install the parts using the bolt and nut. Then attach the Special Service Tool 09961-00950 and use a 17mm socket wrench to tighten the bolt to 59Nm with the tool or 80 Nm without it while pressing the stopper nut. Do this using a torque wrench with a 425mm (1.39 ft.) fulcrum which must remain parallel to the wrench. You should follow the same beginning procedures for AWD by setting the rear strut rod assembly to the tightening position at 9.04 degrees with 3.08 inches standard length and torquing the bolt to standard values. Fasten the No. 3 parking brake cable assembly with its bolt at 6.0 Nm torque with no cable twisting. Lower the car to floor level and bounce the corners to stabilize the suspension before tightening the rear wheel at 103 Nm (1050 kgf-cm, 76ft-lbf).