How to remove the steering wheel on 2009 Toyota Venza?

A proper method to remove the steering wheel involves setting the front wheels straight forward and waiting a minimum of 90 seconds while the SRS system is disabled by disconnecting the negative battery cable. Proceed with the SRS precautions in place before removing lower No. 3 and No. 2 steering wheel covers and extracting the steering pad. The first step to remove the steering wheel includes removing the set nut then marking alignment with matchmarks before disconnecting spiral cable connectors while using Special Service Tool: 09950-50013 to detach the assembly. Special Service Tool 09953-05020 requires grease application on its threads and tip for operational use while the engine switch and battery connection are off (IG) in tandem with avoiding spiral cable rotation. Make sure to check the steering sensor while maintaining the steering wheel in a direct position. Next you can take out the steering wheel damper after screw removal and disconnect the cruise control main switch and its wire. The first step involves disconnecting the two pins from the No. 1 steering wheel ornament after unscrewing the ornament followed by removal of the steering pad switch LH by unscrewing and disengaging the two pins. The steering pad switch assembly needs screws removal while its pins must be detached on the RH and LH sides. The bottom steering wheel boss cover removal requires unscrewing each claw then extracting the two steering pad attaching screws that are part of the lower steering wheel boss cover.

OEM 2009 Toyota Venza Steering Wheel

Navigation Steering Wheel

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

8 Steering Wheels found

View related parts
2009 Toyota Venza Steering Wheel
Part Number: 45100-0T080-C0
$956.74 MSRP: $1402.11
You Save: $445.37 (32%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Wheel Assembly, Steering
- Part Name Code: 45100
- Item Weight: 5.10 Pounds
- Item Dimensions: 16.7 x 15.8 x 7.2 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 45100-0T080-C0
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
More Info
Fits the following 2009 Toyota Venza Submodels:
- Base, LE, Limited, XLE | 6 Cyl 3.5 L GAS
View related parts
2009 Toyota Venza Steering Wheel
Part Number: 45100-0T070-C0
$955.68 MSRP: $1400.56
You Save: $444.88 (32%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Wheel Assembly, Steering
- Part Name Code: 45100
- Item Weight: 5.40 Pounds
- Item Dimensions: 16.7 x 16.4 x 7.3 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 45100-0T070-C0
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
More Info
Fits the following 2009 Toyota Venza Submodels:
- Base, LE, XLE | 4 Cyl 2.7 L GAS
View related parts
2009 Toyota Venza Steering Wheel
Part Number: 45100-0T060-C0
$922.03 MSRP: $1351.25
You Save: $429.22 (32%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Wheel Assembly, Steering
- Manufacturer Note: 3-SPOKE,LEATHER,WITH(LEATHER PACKAGE)&AUDIO-6CD CHANGER,6SPEAKER,BLACK,TRIM0#,1#
- Part Name Code: 45100
- Item Weight: 5.40 Pounds
- Item Dimensions: 16.4 x 15.8 x 7.2 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 45100-0T060-C0
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
More Info
Fits the following 2009 Toyota Venza Submodels:
- Base | 6 Cyl 3.5 L GAS
View related parts
2009 Toyota Venza Steering Wheel
Part Number: 45100-0T050-C0
$918.79 MSRP: $1346.51
You Save: $427.72 (32%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Wheel Assembly, Steering
- Manufacturer Note: 3-SPOKE,LEATHER,WITH(LEATHER PACKAGE)&AUDIO-6CD CHANGER,6SPEAKER,BLACK,TRIM0#,1#
- Part Name Code: 45100
- Item Weight: 5.30 Pounds
- Item Dimensions: 16.5 x 15.8 x 7.4 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 45100-0T050-C0
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
More Info
Fits the following 2009 Toyota Venza Submodels:
- Base | 4 Cyl 2.7 L GAS
View related parts
2009 Toyota Venza Steering Wheel
Part Number: 45100-0T040-C0
$545.64 MSRP: $799.65
You Save: $254.01 (32%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Wheel Assembly, Steering
- Part Name Code: 45100
- Item Weight: 5.40 Pounds
- Item Dimensions: 16.5 x 16.3 x 7.4 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 45100-0T040-C0
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
More Info
Fits the following 2009 Toyota Venza Submodels:
- Base, LE, Limited, XLE | 6 Cyl 3.5 L GAS
View related parts
2009 Toyota Venza Steering Wheel
Part Number: 45100-0T030-C0
$565.67 MSRP: $829.00
You Save: $263.33 (32%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Wheel Assembly, Steering
- Part Name Code: 45100
- Item Weight: 5.10 Pounds
- Item Dimensions: 17.0 x 16.1 x 7.2 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 45100-0T030-C0
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
More Info
Fits the following 2009 Toyota Venza Submodels:
- Base, LE, XLE | 4 Cyl 2.7 L GAS
View related parts
2009 Toyota Venza Steering Wheel
Part Number: 45100-0T020-C0
$532.94 MSRP: $781.03
You Save: $248.09 (32%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Wheel Assembly, Steering
- Manufacturer Note: 3-SPOKE,URETHANE,BLACK,TRIM0#,1#
- Part Name Code: 45100
- Item Weight: 5.60 Pounds
- Item Dimensions: 16.7 x 16.3 x 7.3 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 45100-0T020-C0
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
More Info
Fits the following 2009 Toyota Venza Submodels:
- Base, LE, Limited, XLE | 6 Cyl 3.5 L GAS
View related parts
2009 Toyota Venza Steering Wheel
Part Number: 45100-0T010-C0
$532.94 MSRP: $781.03
You Save: $248.09 (32%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Wheel Assembly, Steering
- Manufacturer Note: 3-SPOKE,URETHANE,BLACK,TRIM0#,1#
- Part Name Code: 45100
- Item Weight: 5.60 Pounds
- Item Dimensions: 16.9 x 16.1 x 7.4 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 45100-0T010-C0
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
More Info
Fits the following 2009 Toyota Venza Submodels:
- Base, LE, XLE | 4 Cyl 2.7 L GAS

2009 Toyota Venza Steering Wheel

Looking for affordable OEM 2009 Toyota Venza Steering Wheel? Explore our comprehensive catalogue of genuine 2009 Toyota Venza Steering Wheel. All our parts are covered by the manufacturer's warranty. Plus, our straightforward return policy and speedy delivery service ensure an unparalleled shopping experience. We look forward to your visit!

2009 Toyota Venza Steering Wheel Parts Q&A

Q: How to remove the steering wheel on 2009 Toyota Venza?
A: A proper method to remove the steering wheel involves setting the front wheels straight forward and waiting a minimum of 90 seconds while the SRS system is disabled by disconnecting the negative battery cable. Proceed with the SRS precautions in place before removing lower No. 3 and No. 2 steering wheel covers and extracting the steering pad. The first step to remove the steering wheel includes removing the set nut then marking alignment with matchmarks before disconnecting spiral cable connectors while using Special Service Tool: 09950-50013 to detach the assembly. Special Service Tool 09953-05020 requires grease application on its threads and tip for operational use while the engine switch and battery connection are off (IG) in tandem with avoiding spiral cable rotation. Make sure to check the steering sensor while maintaining the steering wheel in a direct position. Next you can take out the steering wheel damper after screw removal and disconnect the cruise control main switch and its wire. The first step involves disconnecting the two pins from the No. 1 steering wheel ornament after unscrewing the ornament followed by removal of the steering pad switch LH by unscrewing and disengaging the two pins. The steering pad switch assembly needs screws removal while its pins must be detached on the RH and LH sides. The bottom steering wheel boss cover removal requires unscrewing each claw then extracting the two steering pad attaching screws that are part of the lower steering wheel boss cover.

Alternate Year Models

2010 Toyota Venza Steering Wheel