OEM 2009 Toyota Tundra Wiper Motor

2009 Toyota Tundra Wiper Motor Parts Q&A

• Q: How to install the windshield wiper motor assembly on 2009 Toyota Tundra?

  A: The first step includes fastening the wiper motor through three bolts tightened to 7.5 Nm (75 kgf-cm, 66 in-lbf) which is then followed by lubrication of the crank arm pivot with MP grease. The second step entails fitting the wiper link rod to meet with the crank arm. An installation of the front wiper motor and link assembly requires 4 bolts and a nut which must be torqued to 7.0 Nm (71 kgf-cm, 62 in-lbf) while allowing connector attachment. The installation of the cowl top ventilator louver sub-assembly requires pushing its parts until 8 claws and 2 clips secure into place. Follow the same procedure for attaching the claw to establish the front fender to cowl side seal LH while repeating it for the RH side. The installation of the hood to cowl top seal requires the attachment of all 16 claws. The installation of LH front wiper arm and blade assembly requires stopping the wiper motor at automatic stop position followed by cleaning wiper arm components and using a nut that reaches 20 Nm (204 kgf-cm, 15 ft-lbf) torque for assembly while holding the wiper arm hinge in place. Repeating the identical process for the front wiper arm and blade assembly RH will result in correct alignment and operational verification by using the wipers to check for body interference when washer fluid is sprayed on the windshield glass.