How to install a thermostat on 2009 Toyota Tacoma?

Begin by mounting the new gasket onto the thermostat while setting the jiggle valve toward the top with a 10 degrees allowance on each side of its specific position. Set the water inlet into place using its bolt and nuts and fasten it with a torque of 20 Nm (204 kgf-cm, 15 ft-lbf). Place a new gasket onto the thermostat before positioning the jiggle valve upward with a 10 degrees range to either side. Next step is adding engine coolant while performing a leakage test on it.

OEM 2009 Toyota Tacoma Thermostat

Engine Coolant Thermostat

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

1 Thermostat found

View related parts
2009 Toyota Tacoma Thermostat
Part Number: 90916-03093
$22.57 MSRP: $31.42
You Save: $8.85 (29%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Engine Coolant Thermostat; Thermostat, Coolant
- Manufacturer Note: *WAX 82-95
- Part Name Code: 16331A
- Item Weight: 0.70 Pounds
- Item Dimensions: 3.4 x 2.9 x 2.6 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 90916-03093
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
More Info
Fits the following 2009 Toyota Tacoma Submodels:
- Base, Pre Runner | 4 Cyl 2.7 L GAS

2009 Toyota Tacoma Thermostat

Looking for affordable OEM 2009 Toyota Tacoma Thermostat? Explore our comprehensive catalogue of genuine 2009 Toyota Tacoma Thermostat. All our parts are covered by the manufacturer's warranty. Plus, our straightforward return policy and speedy delivery service ensure an unparalleled shopping experience. We look forward to your visit!

2009 Toyota Tacoma Parts Questions & Experts Answers

Q: How to install a thermostat on 2009 Toyota Tacoma?
A: Begin by mounting the new gasket onto the thermostat while setting the jiggle valve toward the top with a 10 degrees allowance on each side of its specific position. Set the water inlet into place using its bolt and nuts and fasten it with a torque of 20 Nm (204 kgf-cm, 15 ft-lbf). Place a new gasket onto the thermostat before positioning the jiggle valve upward with a 10 degrees range to either side. Next step is adding engine coolant while performing a leakage test on it.

Related 2009 Toyota Tacoma Parts

Alternate Year Models

2008 Toyota Tacoma Thermostat 2010 Toyota Tacoma Thermostat