How to install the thermostat on 2008 Toyota Tacoma?

The 2TR-FE cooling system thermostat requires installation by placing a new gasket first then positioning the jiggle valve upward while maintaining alignment within 10 degrees of the designated location. Begin by placing the new gasket onto the thermostat before positioning the jiggle valve upwards within a ten-degree range. Afterward, install the water inlet together with a new gasket using bolt and nuts and secure them with 20 Nm (204 kgf-cm, 15 ft-lbf) torque. Soon after installation you should add engine coolant then verify for any fluid escape.

OEM 2008 Toyota Tacoma Thermostat

Engine Coolant Thermostat

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

1 Thermostat found

View related parts
2008 Toyota Tacoma Thermostat
Part Number: 90916-03093
$22.57 MSRP: $31.42
You Save: $8.85 (29%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Engine Coolant Thermostat; Thermostat, Coolant
- Manufacturer Note: *WAX 82-95
- Part Name Code: 16331A
- Item Weight: 0.70 Pounds
- Item Dimensions: 3.4 x 2.9 x 2.6 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 90916-03093
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
More Info
Fits the following 2008 Toyota Tacoma Submodels:
- Base, Pre Runner | 4 Cyl 2.7 L GAS

2008 Toyota Tacoma Thermostat

Looking for affordable OEM 2008 Toyota Tacoma Thermostat? Explore our comprehensive catalogue of genuine 2008 Toyota Tacoma Thermostat. All our parts are covered by the manufacturer's warranty. Plus, our straightforward return policy and speedy delivery service ensure an unparalleled shopping experience. We look forward to your visit!

2008 Toyota Tacoma Parts Questions & Experts Answers

Q: How to install the thermostat on 2008 Toyota Tacoma?
A: The 2TR-FE cooling system thermostat requires installation by placing a new gasket first then positioning the jiggle valve upward while maintaining alignment within 10 degrees of the designated location. Begin by placing the new gasket onto the thermostat before positioning the jiggle valve upwards within a ten-degree range. Afterward, install the water inlet together with a new gasket using bolt and nuts and secure them with 20 Nm (204 kgf-cm, 15 ft-lbf) torque. Soon after installation you should add engine coolant then verify for any fluid escape.

Related 2008 Toyota Tacoma Parts

Alternate Year Models

2007 Toyota Tacoma Thermostat 2009 Toyota Tacoma Thermostat