Other Name: Blade, Front Wiper, Right-Hand; Windshield Wiper Blade, Right; Windshield Wiper Blade, Left; Back Glass Wiper Blade; Rear Blade; Blade Assembly; Front Blade; Blade, Front Wiper, Passenger Side; Blade, Front Wiper, Driver Side
Position: Front Passenger Side
Replaces: 85212-13030, 85212-44030
Item Weight: 1.40 Pounds
Item Dimensions: 22.0 x 1.9 x 0.8 inches
Condition: New
Fitment Type: Direct Replacement
SKU: 85212-13031
Warranty: This genuine part is guaranteed by Toyota's
factory warranty.
More Info
Fits the following 2009 Toyota Sienna Submodels:
CE, LE, Limited, XLE, XLE Limited | 6 Cyl 3.3 L GAS, 6 Cyl 3.5 L GAS
Other Name: Rubber, Wiper Insert; Windshield Wiper Blade Refill Set, Rear, Right, Left; Blade Assembly Refill; Wiper Blades for Passenger, Driver, and Rear.
Replaces: 85214-50060
Item Weight: 0.40 Pounds
Material: Rubber
Condition: New
Fitment Type: Direct Replacement
SKU: 85214-50061
Warranty: This genuine part is guaranteed by Toyota's
factory warranty.
More Info
Fits the following 2009 Toyota Sienna Submodels:
CE, LE, Limited, XLE, XLE Limited | 6 Cyl 3.3 L GAS, 6 Cyl 3.5 L GAS
2009 Toyota Sienna Wiper Blade
Looking for affordable OEM 2009 Toyota Sienna Wiper Blade? Explore our comprehensive catalogue of genuine 2009 Toyota Sienna Wiper Blade. All our parts are covered by the manufacturer's warranty. Plus, our straightforward return policy and speedy delivery service ensure an unparalleled shopping experience. We look forward to your visit!
2009 Toyota Sienna Parts Questions & Experts Answers
Q: How to remove the rear wiper blade assembly on 2009 Toyota Sienna?
A: Start the process by dismantling the head cap of the rear wiper arm. Make sure to slow down the rear wiper blade to its operating position until the claw detaches from its slot while listening for the clicking sound. Avoid damaging the claw by taking proper care. Keep the vehicle to your left side while pulling the rear wiper blade directly from its position on the arm. Do not let the arm fold up as you take out the blade. The removal of the rear wiper rubber requires gentle pulling of its exposed end from the blade stopper but avoid excessive force to stop deforming the backing plates or harming the blade claw. The rubber can be extracted more easily by applying moderate pressure in the middle section of the blade.