How to install the brake master cylinder on 2009 Toyota Sienna?

The brake master cylinder should be properly fastened with two nuts tightened to 13 Nm torque (130 kgf-cm, 9ft-lbf). First fasten the brake master cylinder reservoir hose using the sliding clip. Connect the two brake tubes to the master cylinder using Special Service Tool: 09023-00101 and tighten them to 15 Nm (155 kgf-cm, 11ft-lbf). Once the installation is complete add fluid to the brake reservoir while connecting the air cleaner assembly for hose distribution before bleaching through the brake master cylinder, brake line and brake actuator (with VSC). Look for brake fluid quantity in the reservoir and verify brake fluid leak sources. Install the outer front section of the cowl top panel sub-assembly while inspecting brake pedal height and testing the brake actuator through Techstream.

OEM 2009 Toyota Sienna Brake Master Cylinder

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

2 Brake Master Cylinders found

View related parts
2009 Toyota Sienna Master Cylinder
Part Number: 47207-08011
$222.39 MSRP: $317.52
You Save: $95.13 (30%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Cylinder Sub-Assembly, Brake Stroke Simulator; Brake Master Cylinder; Brake Reservoir; Cylinder Sub-Assembly, Brake Master Less Reservoir Tank
- Manufacturer Note: W(VSC)
- Part Name Code: 47207
- Item Weight: 3.70 Pounds
- Item Dimensions: 13.1 x 7.2 x 7.3 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 47207-08011
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
More Info
Fits the following 2009 Toyota Sienna Submodels:
- CE, LE, Limited, XLE, XLE Limited | 6 Cyl 3.3 L GAS, 6 Cyl 3.5 L GAS
View related parts
2009 Toyota Sienna Master Cylinder
Part Number: 47207-08020
$393.49 MSRP: $576.67
You Save: $183.18 (32%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Cylinder Sub-Assembly, Brake Stroke Simulator; Brake Master Cylinder; Brake Reservoir; Cylinder Sub-Assembly, Brake Master Less Reservoir Tank
- Part Name Code: 47207
- Item Weight: 2.40 Pounds
- Item Dimensions: 10.0 x 7.6 x 5.3 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 47207-08020
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
More Info
Fits the following 2009 Toyota Sienna Submodels:
- CE, LE, Limited, XLE, XLE Limited | 6 Cyl 3.3 L GAS, 6 Cyl 3.5 L GAS

2009 Toyota Sienna Brake Master Cylinder

Looking for affordable OEM 2009 Toyota Sienna Brake Master Cylinder? Explore our comprehensive catalogue of genuine 2009 Toyota Sienna Brake Master Cylinder. All our parts are covered by the manufacturer's warranty. Plus, our straightforward return policy and speedy delivery service ensure an unparalleled shopping experience. We look forward to your visit!

2009 Toyota Sienna Parts Questions & Experts Answers

Q: How to install the brake master cylinder on 2009 Toyota Sienna?
A: The brake master cylinder should be properly fastened with two nuts tightened to 13 Nm torque (130 kgf-cm, 9ft-lbf). First fasten the brake master cylinder reservoir hose using the sliding clip. Connect the two brake tubes to the master cylinder using Special Service Tool: 09023-00101 and tighten them to 15 Nm (155 kgf-cm, 11ft-lbf). Once the installation is complete add fluid to the brake reservoir while connecting the air cleaner assembly for hose distribution before bleaching through the brake master cylinder, brake line and brake actuator (with VSC). Look for brake fluid quantity in the reservoir and verify brake fluid leak sources. Install the outer front section of the cowl top panel sub-assembly while inspecting brake pedal height and testing the brake actuator through Techstream.