×
ToyotaParts- Hello
- Login or Register
- Quick Links
- Live Chat
- Track Order
- Parts Availability
- RMA
- Help Center
- Contact Us
- Shop for
- Toyota Parts
- Scion Parts
My Garage
My Account
Cart
OEM 2008 Toyota Sienna Brake Master Cylinder
- Select Vehicle by Model
- Select Vehicle by VIN
Select Vehicle by Model
orMake
Model
Year
Select Vehicle by VIN
For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).
2 Brake Master Cylinders found
2008 Toyota Sienna Master Cylinder
Part Number: 47207-08011$222.39 MSRP: $317.52You Save: $95.13 (30%)Ships in 1-2 Business DaysProduct Specifications- Other Name: Cylinder Sub-Assembly, Brake Stroke Simulator; Brake Master Cylinder; Brake Reservoir; Cylinder Sub-Assembly, Brake Master Less Reservoir Tank
- Manufacturer Note: W(VSC)
- Part Name Code: 47207
- Item Weight: 3.70 Pounds
- Item Dimensions: 13.1 x 7.2 x 7.3 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 47207-08011
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
2008 Toyota Sienna Master Cylinder
Part Number: 47207-08020$393.49 MSRP: $576.67You Save: $183.18 (32%)Ships in 1-3 Business DaysProduct Specifications- Other Name: Cylinder Sub-Assembly, Brake Stroke Simulator; Brake Master Cylinder; Brake Reservoir; Cylinder Sub-Assembly, Brake Master Less Reservoir Tank
- Part Name Code: 47207
- Item Weight: 2.40 Pounds
- Item Dimensions: 10.0 x 7.6 x 5.3 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 47207-08020
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
2008 Toyota Sienna Brake Master Cylinder
Looking for affordable OEM 2008 Toyota Sienna Brake Master Cylinder? Explore our comprehensive catalogue of genuine 2008 Toyota Sienna Brake Master Cylinder. All our parts are covered by the manufacturer's warranty. Plus, our straightforward return policy and speedy delivery service ensure an unparalleled shopping experience. We look forward to your visit!
2008 Toyota Sienna Brake Master Cylinder Parts Q&A
- Q: How to install the brake master cylinder on 2008 Toyota Sienna?A: Two nuts should be used to attach the brake master cylinder at 13 Nm (130 kgf-cm, 9 ft-lbf torque). After that slide the clip and then attach the master cylinder reservoir tube. The brake master cylinder requires attachment of 2 brake tubes through Special Service Tool: 09023-00101 and should receive a torque of 15 Nm (155 kgf-cm, 11 ft-lbf). The installation process demands attaching the air cleaner assembly with hose followed by brake fluid addition to the reservoir and afterward a brake fluid bleeding sequence of the brake master cylinder along with brake line and brake actuator (with VSC). Determining the brake fluid reservoir's braking liquid amount is essential along with brake fluid leak inspection. As the last step remove and install the outer front part of the cowl top panel sub-assembly while checking the brake actuator with Techstream software.