How to install the No. 5 back door Emblem and ensure proper adhesion on 2009 Toyota Sequoia?

The installation of the No. 5 back door name plate requires you to heat the double-sided adhesive tape on the back door panel through infrared light at 40 to 60 degrees Celsius (104 to 140 degrees Fahrenheit) for 1 to 2 minutes followed by wiping off the tape with a cloth when it remains hot. All tape must be removed to avoid adhesion failure while cleaning the surface with a non-residue solvent. The installation process for new No. 5 back door name plates should occur when the ambient temperature reaches above 20 degrees Celsius (68 degrees Fahrenheit) or by heating both name plate and panel to 20 to 30 degrees Celsius (68 to 86 degrees Fahrenheit). The cleaning and heating process should be repeated twice on the No. 3 and No. 4 back door name plates until ambient conditions reach suitable installation temperatures. Before installing the 2 pins of the symbol emblem, clean the surface while heating adhesive tape to remove it together with a non-residue solvent until you create a space for the pins. Maintain an ambient temperature above 20 degrees Celsius (68 degrees Fahrenheit) or heat the parts as needed. Follow the same cleaning process then heating guidelines on the rear door panel before installing No. 1 roof side mark while verifying proper adhesion through these temperature conditions.

OEM 2009 Toyota Sequoia Emblem

Badge

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

8 Emblems found

View related parts
2009 Toyota Sequoia Emblem
Part Number: 75432-06030
$28.91 MSRP: $40.24
You Save: $11.33 (29%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Emblem, Back Door; Deck Lid, Rear; Grille, Front; Hatch, Rear; Hood, Front; Door, Rear; Emblem, Radiator Grille (Or Front Panel); Emblem, Symbol
- Replaces: 90975-02072
- Item Weight: 0.50 Pounds
- Item Dimensions: 13.8 x 11.4 x 2.1 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 75432-06030
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
More Info
Fits the following 2009 Toyota Sequoia Submodels:
- Limited, Nightshade, Platinum, SR5, TRD Pro, TRD Sport | 8 Cyl 4.6 L GAS, 8 Cyl 4.7 L GAS, 8 Cyl 5.7 L FLEX, 8 Cyl 5.7 L GAS
View related parts
2009 Toyota Sequoia Emblem
Part Number: 75311-0C030
$48.58 MSRP: $67.61
You Save: $19.03 (29%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Emblem, Radiator Grille; Grille Emblem, Front; Emblem, Radiator Grille (Or Front Panel)
- Part Name Code: 75311
- Item Weight: 0.70 Pounds
- Item Dimensions: 13.1 x 11.2 x 2.1 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 75311-0C030
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
More Info
Fits the following 2009 Toyota Sequoia Submodels:
- Limited, Nightshade, Platinum, SR5, TRD Pro, TRD Sport | 8 Cyl 4.6 L GAS, 8 Cyl 4.7 L GAS, 8 Cyl 5.7 L FLEX, 8 Cyl 5.7 L GAS
View related parts
2009 Toyota Sequoia Nameplate, Chrome
Part Number: 75455-0C070
$35.40 MSRP: $49.28
You Save: $13.88 (29%)
Ships in 1 Business Day
ADD TO CART
Product Specifications
- Other Name: Plate, Roof Side Nam; Quarter Panel Emblem, Rear; Door Emblem, Front; Door Emblem, Rear; Mark, Roof Side, Passenger Side; Driver Side; Front Door Name; Roof Side Name
- Item Weight: 1.40 Pounds
- Item Dimensions: 4.1 x 4.0 x 4.1 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 75455-0C070
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
More Info
Fits the following 2009 Toyota Sequoia Submodels:
- Limited | 8 Cyl 5.7 L FLEX, 8 Cyl 5.7 L GAS
View related parts
2009 Toyota Sequoia Nameplate
Part Number: 75455-0C050
$31.64 MSRP: $44.05
You Save: $12.41 (29%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Mark, Roof Side; Door Emblem, Rear; Mark, Roof Side, Passenger Side; Mark, Roof Side, Driver Side; Plate, Roof Side Name
- Item Weight: 0.50 Pounds
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 75455-0C050
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
Fits the following 2009 Toyota Sequoia Submodels:
- SR5 | 8 Cyl 4.6 L GAS, 8 Cyl 4.7 L GAS, 8 Cyl 5.7 L FLEX, 8 Cyl 5.7 L GAS
View related parts
2009 Toyota Sequoia Nameplate
Part Number: 75443-34030
$30.46 MSRP: $42.40
You Save: $11.94 (29%)
Ships in 1 Business Day
ADD TO CART
Product Specifications
- Other Name: Plate, Luggage Compartment Door; Plate, Back Door Name
- Manufacturer Note: I FORCE 5.7L V8
- Part Name Code: 75443
- Item Weight: 1.30 Pounds
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 75443-34030
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
More Info
Fits the following 2009 Toyota Sequoia Submodels:
- Limited, Platinum, SR5 | 8 Cyl 5.7 L FLEX, 8 Cyl 5.7 L GAS
View related parts
2009 Toyota Sequoia Nameplate, Rear
Part Number: 75442-0C010
$26.76 MSRP: $37.25
You Save: $10.49 (29%)
Ships in 1 Business Day
ADD TO CART
Product Specifications
- Other Name: Plate, Luggage Compartment Door; Door Emblem, Rear; Mark, Roof Side
- Position: Rear
- Part Name Code: 75455E
- Item Weight: 1.40 Pounds
- Condition: New
- Fitment Type: Direct Replacement
- Require Quantity: 2
- SKU: 75442-0C010
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
More Info
Fits the following 2009 Toyota Sequoia Submodels:
- Platinum | 8 Cyl 5.7 L FLEX, 8 Cyl 5.7 L GAS
View related parts
2009 Toyota Sequoia Nameplate
Part Number: 75444-0C020
$33.33 MSRP: $46.39
You Save: $13.06 (29%)
Ships in 1 Business Day
ADD TO CART
Product Specifications
- Other Name: Plate, Back Door Name
- Manufacturer Note: TOYOTA
- Part Name Code: 75444A
- Item Weight: 1.10 Pounds
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 75444-0C020
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
More Info
Fits the following 2009 Toyota Sequoia Submodels:
- Limited, Platinum, SR5 | 8 Cyl 4.6 L GAS, 8 Cyl 4.7 L GAS, 8 Cyl 5.7 L FLEX, 8 Cyl 5.7 L GAS
View related parts
2009 Toyota Sequoia Nameplate
Part Number: 75445-34010
$24.84 MSRP: $34.58
You Save: $9.74 (29%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Plate, Luggage Compartment Door; Plate, Back Door Name
- Manufacturer Note: FLEX FUEL
- Part Name Code: 75445A
- Item Weight: 1.20 Pounds
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 75445-34010
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
More Info
Fits the following 2009 Toyota Sequoia Submodels:
- Limited, Platinum, SR5 | 8 Cyl 4.6 L GAS, 8 Cyl 4.7 L GAS, 8 Cyl 5.7 L FLEX, 8 Cyl 5.7 L GAS

2009 Toyota Sequoia Emblem

Looking for affordable OEM 2009 Toyota Sequoia Emblem? Explore our comprehensive catalogue of genuine 2009 Toyota Sequoia Emblem. All our parts are covered by the manufacturer's warranty. Plus, our straightforward return policy and speedy delivery service ensure an unparalleled shopping experience. We look forward to your visit!

2009 Toyota Sequoia Parts Questions & Experts Answers

Q: How to install the No. 5 back door Emblem and ensure proper adhesion on 2009 Toyota Sequoia?
A: The installation of the No. 5 back door name plate requires you to heat the double-sided adhesive tape on the back door panel through infrared light at 40 to 60 degrees Celsius (104 to 140 degrees Fahrenheit) for 1 to 2 minutes followed by wiping off the tape with a cloth when it remains hot. All tape must be removed to avoid adhesion failure while cleaning the surface with a non-residue solvent. The installation process for new No. 5 back door name plates should occur when the ambient temperature reaches above 20 degrees Celsius (68 degrees Fahrenheit) or by heating both name plate and panel to 20 to 30 degrees Celsius (68 to 86 degrees Fahrenheit). The cleaning and heating process should be repeated twice on the No. 3 and No. 4 back door name plates until ambient conditions reach suitable installation temperatures. Before installing the 2 pins of the symbol emblem, clean the surface while heating adhesive tape to remove it together with a non-residue solvent until you create a space for the pins. Maintain an ambient temperature above 20 degrees Celsius (68 degrees Fahrenheit) or heat the parts as needed. Follow the same cleaning process then heating guidelines on the rear door panel before installing No. 1 roof side mark while verifying proper adhesion through these temperature conditions.

Related 2009 Toyota Sequoia Parts

Alternate Year Models

2008 Toyota Sequoia Emblem 2010 Toyota Sequoia Emblem