How to remove the rear axle hub and Wheel Bearing on 2009 Toyota RAV4?

The process of removing the rear axle hub and bearing starts with removing the rear wheel followed by disconnecting the negative battery terminal cable for a minimum of 90 seconds before moving on with the work. Use Special Service Tool: 09930-00010 alongside a hammer to unstake the rear axle shaft nut until the nut becomes loose enough to avoid damage to drive shaft screws. Afterward install the brake pad and pull off the lock axle hub nut. Proceed by taking out the rear disc brake cylinder assembly LH and rear disc alongside the skid control sensor wire for 2WD or the rear speed sensor LH for 4WD. The rear shock absorber assembly LH requires removal of its two bolts before disconnection from the axle carrier. To dismantle the axle hub and bearing from the axle carrier of 2WD models you need to remove all four bolts as long as the magnet rotor side remains above foreign objects. To detach the 4WD axle hub and bearing from the axle carrier, mark the drive shaft and axle hub and bearing after which you must remove the four bolts from the carrier while also ensuring proper protection of the magnet rotor side.

OEM 2009 Toyota RAV4 Wheel Bearing

Hub Bearing

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

5 Wheel Bearings found

View related parts
2009 Toyota RAV4 Bearing, Passenger Side
Part Number: 90363-A0007
$27.47 MSRP: $38.24
You Save: $10.77 (29%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Bearing, Radial Ball; CV Axle Shaft Carrier Bearing, Front; Wheel Bearing; Axle Bearing; Bearing (For Front Drive Shaft)
- Position: Passenger Side
- Replaces: 90363-36006
- Part Name Code: 43410C
- Item Weight: 2.20 Pounds
- Item Dimensions: 4.7 x 4.2 x 3.0 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 90363-A0007
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
More Info
Fits the following 2009 Toyota RAV4 Submodels:
- Adventure, Base, Hybrid LE, Hybrid Limited, Hybrid SE, Hybrid XLE, Hybrid XLE Premium, Hybrid XSE, LE, Limited, Platinum, SE, Sport, TRD Off-Road, XLE, XLE Premium | 4 Cyl 2.4 L GAS, 4 Cyl 2.5 L FULL HYBRID EV-GAS (FHEV), 4 Cyl 2.5 L GAS, 6 Cyl 3.5 L GAS
View related parts
2009 Toyota RAV4 Hub Assembly
Part Number: 43550-0R010
$318.22 MSRP: $454.34
You Save: $136.12 (30%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Hub&Bearing Assembly; Front Wheel Bearing & Hub; Wheel Hub Repair Kit; Axle Bearing; Front Hub & Bearing; Hub Sub-Assembly, Front Axle, Passenger & Driver Side; Wheel Bearing Assembly.
- Replaces: 43550-42010
- Item Weight: 1.40 Pounds
- Item Dimensions: 6.0 x 6.0 x 4.3 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 43550-0R010
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
More Info
Fits the following 2009 Toyota RAV4 Submodels:
- Base, Limited, Sport | 4 Cyl 2.4 L GAS, 4 Cyl 2.5 L GAS
View related parts
2009 Toyota RAV4 Hub Assembly
Part Number: 43550-0R020
$283.75 MSRP: $405.12
You Save: $121.37 (30%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Hub&Bearing Assembly; Front Wheel Bearing & Hub; Wheel Hub Repair Kit; Axle Bearing; Front Hub & Bearing; Hub Sub-Assembly for Front Axle, Passenger & Driver Side; Wheel Bearing Assembly.
- Replaces: 43550-42020
- Item Weight: 10.50 Pounds
- Item Dimensions: 7.2 x 7.4 x 7.1 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 43550-0R020
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
More Info
Fits the following 2009 Toyota RAV4 Submodels:
- Adventure, Base, Hybrid Limited, Hybrid SE, Hybrid XLE, LE, Limited, Platinum, SE, Sport, XLE | 4 Cyl 2.5 L FULL HYBRID EV-GAS (FHEV), 4 Cyl 2.5 L GAS, 6 Cyl 3.5 L GAS
View related parts
2009 Toyota RAV4 Hub Assembly
Part Number: 42410-0R010
$247.27 MSRP: $353.05
You Save: $105.78 (30%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Hub&Bearing Assembly; Rear, Rear Left, Rear Right; Wheel Hub Repair Kit; Axle Bearing; Hub & Bearing Assembly, Rear Axle, Passenger & Driver Side; Wheel Bearing and Hub Assembly.
- Replaces: 42410-42040
- Item Weight: 2.70 Pounds
- Item Dimensions: 7.1 x 7.0 x 4.6 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 42410-0R010
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
More Info
Fits the following 2009 Toyota RAV4 Submodels:
- Adventure, Base, Hybrid Limited, Hybrid SE, Hybrid XLE, LE, Limited, Platinum, SE, Sport, XLE | 4 Cyl 2.4 L GAS, 4 Cyl 2.5 L FULL HYBRID EV-GAS (FHEV), 4 Cyl 2.5 L GAS, 6 Cyl 3.5 L GAS
View related parts
2009 Toyota RAV4 Hub & Bearing, Rear
Part Number: 42450-0R010
$417.57 MSRP: $611.95
You Save: $194.38 (32%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Hub&Bearing Assembly, Rear Axle; Wheel Bearing & Hub Assembly; Wheel Hub Repair Kit; Axle Bearing; Hub & Bearing Assembly, Rear Axle, Passenger Side; Driver Side; Wheel Bearing & Hub Assembly.
- Position: Rear
- Replaces: 42450-42040
- Item Weight: 7.80 Pounds
- Item Dimensions: 6.3 x 6.1 x 4.4 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 42450-0R010
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
More Info
Fits the following 2009 Toyota RAV4 Submodels:
- Adventure, Base, Hybrid Limited, Hybrid SE, Hybrid XLE, LE, Limited, Platinum, SE, Sport, XLE | 4 Cyl 2.4 L GAS, 4 Cyl 2.5 L FULL HYBRID EV-GAS (FHEV), 4 Cyl 2.5 L GAS, 6 Cyl 3.5 L GAS

2009 Toyota RAV4 Wheel Bearing

Looking for affordable OEM 2009 Toyota RAV4 Wheel Bearing? Explore our comprehensive catalogue of genuine 2009 Toyota RAV4 Wheel Bearing. All our parts are covered by the manufacturer's warranty. Plus, our straightforward return policy and speedy delivery service ensure an unparalleled shopping experience. We look forward to your visit!

2009 Toyota RAV4 Parts Questions & Experts Answers

Q: How to remove the rear axle hub and Wheel Bearing on 2009 Toyota RAV4?
A: The process of removing the rear axle hub and bearing starts with removing the rear wheel followed by disconnecting the negative battery terminal cable for a minimum of 90 seconds before moving on with the work. Use Special Service Tool: 09930-00010 alongside a hammer to unstake the rear axle shaft nut until the nut becomes loose enough to avoid damage to drive shaft screws. Afterward install the brake pad and pull off the lock axle hub nut. Proceed by taking out the rear disc brake cylinder assembly LH and rear disc alongside the skid control sensor wire for 2WD or the rear speed sensor LH for 4WD. The rear shock absorber assembly LH requires removal of its two bolts before disconnection from the axle carrier. To dismantle the axle hub and bearing from the axle carrier of 2WD models you need to remove all four bolts as long as the magnet rotor side remains above foreign objects. To detach the 4WD axle hub and bearing from the axle carrier, mark the drive shaft and axle hub and bearing after which you must remove the four bolts from the carrier while also ensuring proper protection of the magnet rotor side.