How to install the brake master cylinder on 2009 Toyota RAV4?

The installation process of the brake master cylinder requires downward-facing tip orientation of the master cylinder and piston to avoid piston loss and cleaning the piston followed by lubricating the booster contact surface with lithium soap base glycol grease. The installation process starts with installing a new master cylinder O-ring followed by attaching the master cylinder to the booster with 2 nuts correctly torqued to 9 ft-lbf (13 Nm, 127 kgf-cm). Use a 10 mm union nut wrench to join the master cylinder with its brake lines. Tighten with 15 Nm torque when no wrench is used but reduce this to 14 Nm using the wrench. Maintain the wrench in parallel alignment with the union nut wrench for proper installation. The brake fluid level warning switch connector must be fitted to the master cylinder at location A. First add brake fluid into the reservoir before removing air out from the brake master cylinder and brake line and ABS and traction actuator assembly. After which verify the brake fluid amount in the reservoir while checking for any fluid leaks. Installation of the air cleaner case sub-assembly occurs for the 2AR-FE while the 2GR-FE requires the air cleaner case.

OEM 2009 Toyota RAV4 Brake Master Cylinder

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

4 Brake Master Cylinders found

View related parts
2009 Toyota RAV4 Master Cylinder
Part Number: 47201-42382
$240.79 MSRP: $343.80
You Save: $103.01 (30%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Cylinder Sub-Assembly, Brake Stroke Simulator; Brake Master Cylinder; Brake Mster Cylinder; Brake Reservoir; Cylinder Sub-Assembly, Brake Master W/Plate
- Manufacturer Note: THIRD SEAT-WITH(2PERSONS)
- Replaces: 47028-42070, 47201-42380
- Part Name Code: 47028
- Item Weight: 2.40 Pounds
- Item Dimensions: 10.5 x 7.6 x 5.5 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 47201-42382
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
More Info
Fits the following 2009 Toyota RAV4 Submodels:
- Adventure, Base, Hybrid Limited, Hybrid XLE, Limited, Platinum, Sport, XLE | 4 Cyl 2.5 L FULL HYBRID EV-GAS (FHEV), 4 Cyl 2.5 L GAS, 6 Cyl 3.5 L GAS
View related parts
2009 Toyota RAV4 Master Cylinder
Part Number: 47201-0R082
$184.87 MSRP: $263.96
You Save: $79.09 (30%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Cylinder Sub-Assembly, Brake Stroke Simulator; Brake Master Cylinder; Brake Mster Cylinder; Brake Reservoir; Cylinder Sub-Assembly, Brake Master W/Plate; Cylinder Sub-Assembly, Brake Master
- Replaces: 47201-0R080
- Item Weight: 2.40 Pounds
- Item Dimensions: 9.8 x 7.7 x 5.4 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 47201-0R082
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
More Info
Fits the following 2009 Toyota RAV4 Submodels:
- Adventure, Base, Hybrid Limited, Hybrid XLE, Limited, Platinum, Sport, XLE | 4 Cyl 2.4 L GAS, 4 Cyl 2.5 L FULL HYBRID EV-GAS (FHEV), 4 Cyl 2.5 L GAS, 6 Cyl 3.5 L GAS
View related parts
2009 Toyota RAV4 Master Cylinder
Part Number: 47201-42340
$223.78 MSRP: $319.52
You Save: $95.74 (30%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Cylinder Sub-Assembly, Brake Stroke Simulator; Brake Master Cylinder; Brake Reservoir; Cylinder Sub-Assembly, Brake Master W/Plate
- Replaces: 47028-42030
- Part Name Code: 47028
- Item Weight: 6.70 Pounds
- Item Dimensions: 10.0 x 7.4 x 5.5 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 47201-42340
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
More Info
Fits the following 2009 Toyota RAV4 Submodels:
- Base, LE, Limited, Sport | 4 Cyl 2.5 L GAS
View related parts
2009 Toyota RAV4 Master Cylinder
Part Number: 47201-0R070
$191.75 MSRP: $273.77
You Save: $82.02 (30%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Cylinder Sub-Assembly, Brake Stroke Simulator; Brake Master Cylinder; Brake Reservoir; Cylinder Sub-Assembly, Brake Master W/Plate; Cylinder Sub-Assembly, Brake Master
- Item Weight: 2.40 Pounds
- Item Dimensions: 12.2 x 6.7 x 4.9 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 47201-0R070
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
More Info
Fits the following 2009 Toyota RAV4 Submodels:
- Base, LE, Limited, Sport | 4 Cyl 2.4 L GAS, 4 Cyl 2.5 L GAS

2009 Toyota RAV4 Brake Master Cylinder

Looking for affordable OEM 2009 Toyota RAV4 Brake Master Cylinder? Explore our comprehensive catalogue of genuine 2009 Toyota RAV4 Brake Master Cylinder. All our parts are covered by the manufacturer's warranty. Plus, our straightforward return policy and speedy delivery service ensure an unparalleled shopping experience. We look forward to your visit!

2009 Toyota RAV4 Parts Questions & Experts Answers

Q: How to install the brake master cylinder on 2009 Toyota RAV4?
A: The installation process of the brake master cylinder requires downward-facing tip orientation of the master cylinder and piston to avoid piston loss and cleaning the piston followed by lubricating the booster contact surface with lithium soap base glycol grease. The installation process starts with installing a new master cylinder O-ring followed by attaching the master cylinder to the booster with 2 nuts correctly torqued to 9 ft-lbf (13 Nm, 127 kgf-cm). Use a 10 mm union nut wrench to join the master cylinder with its brake lines. Tighten with 15 Nm torque when no wrench is used but reduce this to 14 Nm using the wrench. Maintain the wrench in parallel alignment with the union nut wrench for proper installation. The brake fluid level warning switch connector must be fitted to the master cylinder at location A. First add brake fluid into the reservoir before removing air out from the brake master cylinder and brake line and ABS and traction actuator assembly. After which verify the brake fluid amount in the reservoir while checking for any fluid leaks. Installation of the air cleaner case sub-assembly occurs for the 2AR-FE while the 2GR-FE requires the air cleaner case.