How to install the rear spoiler and its components on 2009 Toyota Prius?

Installation of the rear spoiler requires proper setup of the center stop light assembly first. You should warm both the vehicle body and the spoiler sub-assembly with a heat light when installing large type rear spoilers but avoid overheating them. Protective tape goes underneath the rear spoiler before you start heating both the vehicle body along with the rear spoiler. Both surfaces need a clean of double-sided tape adhesive before starting installation procedures. Set both sides of newly applied double-sided tape on the rear spoiler and repeat the heating process before removing protective materials. Prior to activating the exposed adhesive on the rear spoiler eliminate all foreign substances affixed to its surfaces. Proceed to connect the center stop light connector followed by attaching three clips after that install four bolts. The installation process should include the rear wiper motor assembly followed by the back door upper trim board assembly while concluding with the back door lower trim board assembly and rear wiper arm assembly. Installation requires that you apply the cable to the terminal of the negative (-) battery while performing initialization because several systems need initialization when disconnecting and reconnecting the cable.

OEM 2009 Toyota Prius Spoiler

Spoiler Wing

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

6 Spoilers found

View related parts
2009 Toyota Prius Spoiler, Passenger Side
Part Number: 76087-47010
$149.57 MSRP: $211.73
You Save: $62.16 (30%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Spoiler Sub-Assembly, Rear; Spoiler, Rear Left Lower; Spoiler, Rear Side Passenger Side
- Position: Passenger Side
- Part Name Code: 76897A
- Item Weight: 11.00 Pounds
- Item Dimensions: 49.9 x 4.1 x 4.0 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 76087-47010
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
More Info
Fits the following 2009 Toyota Prius Submodels:
- Base, Touring | 4 Cyl 1.5 L FULL HYBRID EV-GAS (FHEV)
View related parts
2009 Toyota Prius Spoiler, Rear Side Driver Side
Part Number: 76088-47010
$149.57 MSRP: $211.73
You Save: $62.16 (30%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Spoiler Sub-Assembly, Rear; Spoiler, Rear Right Lower; Spoiler, Rear Side Driver Side
- Position: Rear Side Driver Side
- Part Name Code: 76898A
- Item Weight: 1.40 Pounds
- Item Dimensions: 24.5 x 10.4 x 6.2 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 76088-47010
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
More Info
Fits the following 2009 Toyota Prius Submodels:
- Base, Touring | 4 Cyl 1.5 L FULL HYBRID EV-GAS (FHEV)
View related parts
2009 Toyota Prius Spoiler Center, Rear
Part Number: 76891-47010
$145.96 MSRP: $206.62
You Save: $60.66 (30%)
Ships in 1 Business Day
ADD TO CART
Product Specifications
- Other Name: Spoiler, Rear; Spoiler, Rear Center
- Position: Rear
- Part Name Code: 76891
- Item Weight: 1.40 Pounds
- Item Dimensions: 48.0 x 0.8 x 0.2 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 76891-47010
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
More Info
Fits the following 2009 Toyota Prius Submodels:
- Base, Touring | 4 Cyl 1.5 L FULL HYBRID EV-GAS (FHEV)
View related parts
2009 Toyota Prius Spoiler, Front
Part Number: 76851-47010
$77.37 MSRP: $108.60
You Save: $31.23 (29%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Cover, Front Spoiler; Spoiler, Front
- Position: Front
- Part Name Code: 76851
- Item Weight: 2.40 Pounds
- Item Dimensions: 53.5 x 6.2 x 6.1 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 76851-47010
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
More Info
Fits the following 2009 Toyota Prius Submodels:
- Base, Touring | 4 Cyl 1.5 L FULL HYBRID EV-GAS (FHEV)
View related parts
2009 Toyota Prius Spoiler Assembly, Rear
Part Number: 76085-47903
$366.38 MSRP: $536.93
You Save: $170.55 (32%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Spoiler Sub-Assembly, Rear; Spoiler, Rear
- Manufacturer Note: PAINT REQ.
- Position: Rear
- Replaces: 76085-47021-D1, 76085-47021-G1, 76085-47900, 76085-47021-B1, 76085-47021-A2
- Part Name Code: 76085
- Item Weight: 4.10 Pounds
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 76085-47903
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
More Info
Fits the following 2009 Toyota Prius Submodels:
- Base | 4 Cyl 1.5 L FULL HYBRID EV-GAS (FHEV)
View related parts
2009 Toyota Prius Spoiler Assembly, Rear
Part Number: 76085-47902
$366.38 MSRP: $536.93
You Save: $170.55 (32%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Spoiler Sub-Assembly, Rear; Spoiler, Rear
- Manufacturer Note: PAINT REQ.,REAR SPOILER-WITH LARGE (W/FIN)
- Position: Rear
- Part Name Code: 76085
- Item Weight: 6.40 Pounds
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 76085-47902
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
More Info
Fits the following 2009 Toyota Prius Submodels:
- Base, Touring | 4 Cyl 1.5 L FULL HYBRID EV-GAS (FHEV)

2009 Toyota Prius Spoiler

Looking for affordable OEM 2009 Toyota Prius Spoiler? Explore our comprehensive catalogue of genuine 2009 Toyota Prius Spoiler. All our parts are covered by the manufacturer's warranty. Plus, our straightforward return policy and speedy delivery service ensure an unparalleled shopping experience. We look forward to your visit!

2009 Toyota Prius Parts Questions & Experts Answers

Q: How to install the rear spoiler and its components on 2009 Toyota Prius?
A: Installation of the rear spoiler requires proper setup of the center stop light assembly first. You should warm both the vehicle body and the spoiler sub-assembly with a heat light when installing large type rear spoilers but avoid overheating them. Protective tape goes underneath the rear spoiler before you start heating both the vehicle body along with the rear spoiler. Both surfaces need a clean of double-sided tape adhesive before starting installation procedures. Set both sides of newly applied double-sided tape on the rear spoiler and repeat the heating process before removing protective materials. Prior to activating the exposed adhesive on the rear spoiler eliminate all foreign substances affixed to its surfaces. Proceed to connect the center stop light connector followed by attaching three clips after that install four bolts. The installation process should include the rear wiper motor assembly followed by the back door upper trim board assembly while concluding with the back door lower trim board assembly and rear wiper arm assembly. Installation requires that you apply the cable to the terminal of the negative (-) battery while performing initialization because several systems need initialization when disconnecting and reconnecting the cable.