How to install the rear spoiler on 2008 Toyota Prius?

The first step for installing the rear spoiler requires you to install the center stop light assembly. Heating both the vehicle body and spoiler with a heat light is necessary for installing the large type rear spoiler but customers should avoid overheating these materials. Protective tape should be applied first under the rear spoiler before heating both the rear spoiler and vehicle body surface. Clean up both surfaces with adhesive residue after removing double-sided tape rounds. After applying new double-sided tape to the rear spoiler users must heat both surfaces of the component again. Take care to keep the exposed adhesive of the rear spoiler without foreign debris after peeling out the release paper. You need to fit the center stop light connector and place three clips for rear spoiler attachment while installing four bolts. Continue with the installation process of the rear wiper motor assembly followed by back door upper trim board assembly and back door lower trim board assembly before completing with the rear wiper arm assembly. Connect the cable to the negative battery terminal next while conducting initialization since this step becomes mandatory for systems that need battery termination (negative).

OEM 2008 Toyota Prius Spoiler

Spoiler Wing

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

6 Spoilers found

View related parts
2008 Toyota Prius Spoiler, Passenger Side
Part Number: 76087-47010
$149.57 MSRP: $211.73
You Save: $62.16 (30%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Spoiler Sub-Assembly, Rear; Spoiler, Rear Left Lower; Spoiler, Rear Side Passenger Side
- Position: Passenger Side
- Part Name Code: 76897A
- Item Weight: 11.00 Pounds
- Item Dimensions: 49.9 x 4.1 x 4.0 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 76087-47010
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
More Info
Fits the following 2008 Toyota Prius Submodels:
- Base, Touring | 4 Cyl 1.5 L FULL HYBRID EV-GAS (FHEV)
View related parts
2008 Toyota Prius Spoiler, Rear Side Driver Side
Part Number: 76088-47010
$164.61 MSRP: $233.02
You Save: $68.41 (30%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Spoiler Sub-Assembly, Rear; Spoiler, Rear Right Lower; Spoiler, Rear Side Driver Side
- Position: Rear Side Driver Side
- Part Name Code: 76898A
- Item Weight: 1.40 Pounds
- Item Dimensions: 24.5 x 10.4 x 6.2 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 76088-47010
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
More Info
Fits the following 2008 Toyota Prius Submodels:
- Base, Touring | 4 Cyl 1.5 L FULL HYBRID EV-GAS (FHEV)
View related parts
2008 Toyota Prius Spoiler Center, Rear
Part Number: 76891-47010
$146.04 MSRP: $206.74
You Save: $60.70 (30%)
Ships in 1 Business Day
ADD TO CART
Product Specifications
- Other Name: Spoiler, Rear; Spoiler, Rear Center
- Position: Rear
- Part Name Code: 76891
- Item Weight: 1.40 Pounds
- Item Dimensions: 48.0 x 0.8 x 0.2 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 76891-47010
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
More Info
Fits the following 2008 Toyota Prius Submodels:
- Base, Touring | 4 Cyl 1.5 L FULL HYBRID EV-GAS (FHEV)
View related parts
2008 Toyota Prius Spoiler, Front
Part Number: 76851-47010
$77.37 MSRP: $108.60
You Save: $31.23 (29%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Cover, Front Spoiler; Spoiler, Front
- Position: Front
- Part Name Code: 76851
- Item Weight: 2.40 Pounds
- Item Dimensions: 53.5 x 6.2 x 6.1 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 76851-47010
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
More Info
Fits the following 2008 Toyota Prius Submodels:
- Base, Touring | 4 Cyl 1.5 L FULL HYBRID EV-GAS (FHEV)
View related parts
2008 Toyota Prius Spoiler Assembly, Rear
Part Number: 76085-47903
$366.48 MSRP: $537.08
You Save: $170.60 (32%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Spoiler Sub-Assembly, Rear; Spoiler, Rear
- Manufacturer Note: PAINT REQ.
- Position: Rear
- Replaces: 76085-47021-D1, 76085-47021-G1, 76085-47900, 76085-47021-B1, 76085-47021-A2
- Part Name Code: 76085
- Item Weight: 4.10 Pounds
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 76085-47903
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
More Info
Fits the following 2008 Toyota Prius Submodels:
- Base | 4 Cyl 1.5 L FULL HYBRID EV-GAS (FHEV)
View related parts
2008 Toyota Prius Spoiler Assembly, Rear
Part Number: 76085-47902
$366.48 MSRP: $537.08
You Save: $170.60 (32%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Spoiler Sub-Assembly, Rear; Spoiler, Rear
- Manufacturer Note: PAINT REQ.,REAR SPOILER-WITH LARGE (W/FIN)
- Position: Rear
- Part Name Code: 76085
- Item Weight: 6.40 Pounds
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 76085-47902
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
More Info
Fits the following 2008 Toyota Prius Submodels:
- Base, Touring | 4 Cyl 1.5 L FULL HYBRID EV-GAS (FHEV)

2008 Toyota Prius Spoiler

Looking for affordable OEM 2008 Toyota Prius Spoiler? Explore our comprehensive catalogue of genuine 2008 Toyota Prius Spoiler. All our parts are covered by the manufacturer's warranty. Plus, our straightforward return policy and speedy delivery service ensure an unparalleled shopping experience. We look forward to your visit!

2008 Toyota Prius Spoiler Parts Q&A

Q: How to install the rear spoiler on 2008 Toyota Prius?
A: The first step for installing the rear spoiler requires you to install the center stop light assembly. Heating both the vehicle body and spoiler with a heat light is necessary for installing the large type rear spoiler but customers should avoid overheating these materials. Protective tape should be applied first under the rear spoiler before heating both the rear spoiler and vehicle body surface. Clean up both surfaces with adhesive residue after removing double-sided tape rounds. After applying new double-sided tape to the rear spoiler users must heat both surfaces of the component again. Take care to keep the exposed adhesive of the rear spoiler without foreign debris after peeling out the release paper. You need to fit the center stop light connector and place three clips for rear spoiler attachment while installing four bolts. Continue with the installation process of the rear wiper motor assembly followed by back door upper trim board assembly and back door lower trim board assembly before completing with the rear wiper arm assembly. Connect the cable to the negative battery terminal next while conducting initialization since this step becomes mandatory for systems that need battery termination (negative).