Other Name: Hatch Lift Support, Left; Back Glass Lift Support; Liftgate Lift Support; Door Lift Support; Stay Assembly, Back Door, Driver Side; Lift Support
Manufacturer Note: REAR WINDOW WIPER-WITH
Position: Driver Side
Part Name Code: 68960
Item Weight: 1.30 Pounds
Item Dimensions: 24.5 x 2.7 x 1.2 inches
Condition: New
Fitment Type: Direct Replacement
SKU: 68960-02100
Warranty: This genuine part is guaranteed by Toyota's
factory warranty.
Other Name: Hatch Lift Support, Right; Back Glass Lift Support; Liftgate Lift Support; Door Lift Support; Stay Assembly, Back Door, Passenger Side; Lift Support
Manufacturer Note: REAR WINDOW WIPER-WITH
Position: Passenger Side
Part Name Code: 68950C
Item Weight: 1.30 Pounds
Item Dimensions: 25.3 x 2.7 x 1.2 inches
Condition: New
Fitment Type: Direct Replacement
SKU: 68950-02110
Warranty: This genuine part is guaranteed by Toyota's
factory warranty.
Other Name: Back Glass Lift Support; Liftgate Lift Support; Door Lift Support; Lift Support; Stay Assembly, Back Door, Passenger Side
Position: Passenger Side
Part Name Code: 68950C
Item Weight: 1.30 Pounds
Item Dimensions: 24.1 x 2.6 x 1.2 inches
Condition: New
Fitment Type: Direct Replacement
SKU: 68950-02120
Warranty: This genuine part is guaranteed by Toyota's
factory warranty.
More Info
Fits the following 2009 Toyota Matrix Submodels:
Base, S, XRS | 4 Cyl 1.8 L GAS, 4 Cyl 2.4 L GAS
2009 Toyota Matrix Liftgate Lift Support
Looking for affordable OEM 2009 Toyota Matrix Liftgate Lift Support? Explore our comprehensive catalogue of genuine 2009 Toyota Matrix Liftgate Lift Support. All our parts are covered by the manufacturer's warranty. Plus, our straightforward return policy and speedy delivery service ensure an unparalleled shopping experience. We look forward to your visit!
2009 Toyota Matrix Liftgate Lift Support Parts Q&A
Q: How to install Liftgate Lift Support for the back door upper damper stay bracket on 2009 Toyota Matrix?
A: Before installing the back door upper damper stay bracket users must clean the threaded vehicle body portion with non-residue solvent while applying Toyota Genuine Adhesive 1324, Three Bond 1324, or an equivalent to the 2 bolt threads. Use Toyota Genuine Adhesive 1324 or equivalent to coat the bolt threads on the bracket before installing it with the bolts torqued to 7.5 Nm (77 kgf-cm, 66 in-lbf). Install the new stay bolt after cleaning the vehicle body threads with non-residue solvent by torquing it to 22 Nm (224 kgf-cm, 16 ft-lbf). To reuse the back door stay bolt users should wash the threaded surface, apply adhesive to the threaded area followed by bolt installation at 22 Nm (224 kgf-cm, 16 ft-lbf). Avoid contact with the back door stay rod stroke areas to stop foreign materials from adhering and refrain from using cotton gloves and applying any horizontal stresses on the cylinders to prevent deforming this component. Before installing the back door stay assembly clients must insert the stop rings simultaneously then hand-support the back door with proper hood support engagement into the ball joint.