OEM 2009 Toyota Matrix Dimmer Switch

2009 Toyota Matrix Dimmer Switch Parts Q&A

• Q: How to install the headlight dimmer switch assembly and other components on 2009 Toyota Matrix?

  A: Engineers should start by connecting the connector then install the headlight dimmer switch assembly while tightening the clamp and engaging the claw. After the windshield wiper switch assembly installation you should add the spiral cable with steering angle sensor followed by upper steering column cover and lower steering column cover. Following that installation of the lower instrument panel finish panel sub-assembly and No. 1 switch hole base and lower center instrument panel finish panel should be completed for both manual and automatic transaxles. First install front console box inserts and the assembly which supports 2WD and 4WD operations as well as the installing console box carpet. Continue the assembly with the No. 2 switch hole base then install the front upper console box together with the center instrument cluster finish panel assembly for both manual and automatic transaxles. A technician should install all sub-assemblies needed for shift lever knobs as well as both manual and automatic transaxles. Fixments of the lower panel, meter hood and instrument cluster panels with their respective sub-assemblies should also be installed. Put the front wheels directly in front position before you adjust the spiral cable and install the steering wheel components. Examine the steering wheel center position before mounting the steering pad and adding lower No. 3 and No. 2 steering wheel covers. The cable needs to be connected to the negative battery terminal while examining the steering pad and checking the SRS warning light.