How to install the water pump assembly and related components on 2009 Toyota Highlander?

Position the new gasket first then fasten the water pump using 7 bolts before tightening them to 21 Nm (214 kgf-cm, 15 ft-lbf). The V-ribbed belt tensioner assembly should be installed first before installing the generator assembly. During the installation process you need to put on the V-ribbed belt. Installing the cable begins with attaching it to the negative battery terminal although initialization procedures might be needed depending on the system design. Engine coolant should be added after which technicians need to check for any coolant leaks. The installation process requires fitting the No. 1 engine under cover as the last step.

OEM 2009 Toyota Highlander Water Pump

H2O Pump

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

6 Water Pumps found

View related parts
2009 Toyota Highlander Water Pump
Part Number: 16100-09515
$103.32 MSRP: $145.02
You Save: $41.70 (29%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Pump Assembly, Water; Engine Water Pump; Water Pump Assembly; Pump Assembly, Engine Water
- Part Name Code: 16100
- Item Weight: 1.40 Pounds
- Item Dimensions: 7.1 x 7.1 x 7.1 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 16100-09515
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
More Info
Fits the following 2009 Toyota Highlander Submodels:
- Base, LE, Plus, SE | 4 Cyl 2.7 L GAS
View related parts
2009 Toyota Highlander Water Pump
Part Number: 16100-09442
$136.76 MSRP: $193.60
You Save: $56.84 (30%)
ADD TO CART
Product Specifications
- Other Name: Pump Assembly, Water; Engine Water Pump; Water Pump Assembly; Pump Assembly, Engine Water
- Manufacturer Note: (L)
- Replaces: 16100-39456, 16100-09440, 16100-09441, 16100-39455
- Part Name Code: 16100
- Item Weight: 4.20 Pounds
- Item Dimensions: 14.4 x 8.4 x 6.3 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 16100-09442
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
More Info
Fits the following 2009 Toyota Highlander Submodels:
- Base, Hybrid, Hybrid Limited, LE, LE Plus, Limited, Plus, SE, Sport, XLE | 6 Cyl 3.5 L FULL HYBRID EV-GAS (FHEV), 6 Cyl 3.5 L GAS
View related parts
2009 Toyota Highlander Water Pump
Part Number: 16100-29085
$75.09 MSRP: $105.41
You Save: $30.32 (29%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Pump Assembly, Water; Engine Water Pump; Water Pump Assembly; Pump Assembly, Engine Water
- Replaces: 16100-09070
- Part Name Code: 16100
- Item Weight: 2.50 Pounds
- Item Dimensions: 10.0 x 6.5 x 5.9 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 16100-29085
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
More Info
Fits the following 2009 Toyota Highlander Submodels:
- Base, Hybrid, Hybrid Limited, Limited, Sport | 6 Cyl 3.0 L GAS, 6 Cyl 3.3 L FULL HYBRID EV-GAS (FHEV), 6 Cyl 3.3 L GAS
View related parts
2009 Toyota Highlander Water Pump
Part Number: G9030-48031
$623.77 MSRP: $914.15
You Save: $290.38 (32%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Oil Cooler&Water Pump; Automatic Transmission Oil Cooler; Oil Cooler Assembly
- Replaces: G9030-48030
- Item Weight: 2.40 Pounds
- Item Dimensions: 12.0 x 6.8 x 5.7 inches
- Condition: New
- SKU: G9030-48031
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
More Info
Fits the following 2009 Toyota Highlander Submodels:
- Hybrid, Hybrid Limited | 6 Cyl 3.3 L FULL HYBRID EV-GAS (FHEV)
View related parts
2009 Toyota Highlander Auxiliary Pump
Part Number: 87200-48060
$791.30 MSRP: $1159.66
You Save: $368.36 (32%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Accessory Assembly, Heat; Pump Assembly, Water(For Heater)
- Part Name Code: 87200A
- Item Weight: 1.50 Pounds
- Item Dimensions: 7.0 x 3.7 x 2.0 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 87200-48060
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
More Info
Fits the following 2009 Toyota Highlander Submodels:
- Hybrid, Hybrid Limited | 6 Cyl 3.3 L FULL HYBRID EV-GAS (FHEV)
View related parts
2009 Toyota Highlander Auxiliary Pump
Part Number: 87200-48070
$815.46 MSRP: $1195.06
You Save: $379.60 (32%)
Ships in 1-3 Business Days
Product Specifications
- Other Name: Accessory Assembly, Heat; Pump Assembly, Water(For Heater)
- Part Name Code: 87200A
- Item Weight: 1.50 Pounds
- Item Dimensions: 6.8 x 3.7 x 2.0 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 87200-48070
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
More Info
Fits the following 2009 Toyota Highlander Submodels:
- Hybrid, Hybrid Limited | 6 Cyl 3.3 L FULL HYBRID EV-GAS (FHEV)

2009 Toyota Highlander Water Pump

Looking for affordable OEM 2009 Toyota Highlander Water Pump? Explore our comprehensive catalogue of genuine 2009 Toyota Highlander Water Pump. All our parts are covered by the manufacturer's warranty. Plus, our straightforward return policy and speedy delivery service ensure an unparalleled shopping experience. We look forward to your visit!

2009 Toyota Highlander Parts Questions & Experts Answers

Q: How to install the water pump assembly and related components on 2009 Toyota Highlander?
A: Position the new gasket first then fasten the water pump using 7 bolts before tightening them to 21 Nm (214 kgf-cm, 15 ft-lbf). The V-ribbed belt tensioner assembly should be installed first before installing the generator assembly. During the installation process you need to put on the V-ribbed belt. Installing the cable begins with attaching it to the negative battery terminal although initialization procedures might be needed depending on the system design. Engine coolant should be added after which technicians need to check for any coolant leaks. The installation process requires fitting the No. 1 engine under cover as the last step.