Other Name: Lock Assembly, Front Door W; Door Lock Actuator Motor, Front Left; Door Latch Assembly, Front Left; Lock Assembly; Front Door W/Motor, Driver Side; Door Lock Actuator Motor.
Position: Driver Side
Item Weight: 2.40 Pounds
Item Dimensions: 16.6 x 11.7 x 3.1 inches
Condition: New
Fitment Type: Direct Replacement
SKU: 69040-47060
Warranty: This genuine part is guaranteed by Toyota's
factory warranty.
More Info
Fits the following 2009 Toyota FJ Cruiser Submodels:
Base, Trail Teams Special Edition, TRD Special Edition | 6 Cyl 4.0 L GAS
Other Name: Lock Assembly, Front Door W; Door Lock Actuator Motor, Front Right; Door Latch Assembly, Front Right; Lock Assembly; Front Door W/Motor, Passenger Side; Door Lock Actuator Motor.
Position: Passenger Side
Item Weight: 2.40 Pounds
Item Dimensions: 15.6 x 11.4 x 3.1 inches
Condition: New
Fitment Type: Direct Replacement
SKU: 69030-52470
Warranty: This genuine part is guaranteed by Toyota's
factory warranty.
More Info
Fits the following 2009 Toyota FJ Cruiser Submodels:
Base, Trail Teams Special Edition, TRD Special Edition | 6 Cyl 4.0 L GAS
2009 Toyota FJ Cruiser Door Lock
Looking for affordable OEM 2009 Toyota FJ Cruiser Door Lock? Explore our comprehensive catalogue of genuine 2009 Toyota FJ Cruiser Door Lock. All our parts are covered by the manufacturer's warranty. Plus, our straightforward return policy and speedy delivery service ensure an unparalleled shopping experience. We look forward to your visit!
2009 Toyota FJ Cruiser Parts Questions & Experts Answers
Q: How do you install the front door lock on 2009 Toyota FJ Cruiser?
A: Before installing the front door lock start by changing the packing material in the connecting section with new parts. Also eliminate all traces of grease and dirt from packing surfaces. Connect the front door lock remote control cable and the front door inside locking cable after applying MP grease to all sliding and rotating front door lock points. Secure the door lock open rod into the front door lock before setting it to the door panel with a confirmation of proper outside handle link engagement with the door lock. Use Toyota Genuine Adhesive 1324 or Three Bond 1324 or equivalent adhesive before assembling the front door lock with its three screws by applying a "Torx" socket wrench T30 with torque set to 5.0 Nm (51 kgf-cm, 44 in-lbf). A "Torx" socket wrench T30 should be used to install the front door lock cylinder with a torque of 5.5 Nm (56 kgf-cm, 49 in-lbf) after inserting the door lock key cylinder rod and then installing the hole plug. Proceed to install the front door glass sub-assembly, front door window frame rear lower, front door lower frame bracket garnish, front door frame sub-assembly front lower, front door glass run, front door Weather Strip, front door check assembly, front door inside panel plate, front door service hole cover, front No. 1 speaker, front door glass outer Weather Strip assembly, outer rear view mirror, front No. 2 door service hole cover, front door trim board sub-assembly, and front armrest base upper panel. Use the cable to connect the negative battery terminal while applying 3.9 Nm (40 kgf-cm, 35 in-lbf) torque.