How to remove and replace the ABS Control Module for Antilock Brakes on 2009 Toyota Camry?

The work process for Hydraulic Control Assembly for Antilock Brakes installation begins with disconnecting the cable from the negative terminal of the battery. The radiator reserve tank assembly can be detached through hose disconnection followed by removal of the tank assembly itself. The brake fluid needs draining and immediate surface cleaning must occur for all paint areas where fluid spilled. Begin by unlocking the brake actuator with its lock lever before unconnecting its brake actuator connector. Special Service Tool: 09023-00101 permits disconnecting the 6 brake lines from the brake actuator with the bracket assembly while writing down their connection points at 1 for Front Wheel Cylinder RH, 2 for Front Wheel Cylinder LH, 3 for Rear Wheel Cylinder RH, 4 for Rear Wheel Cylinder LH, 5 for 2nd Master Cylinder, 6 for 1st Master Cylinder. Seize the three bolts which mount the brake actuator to the body frame before taking out both components and their bracket assembly while being vigilant about brake lines and wire harnesses during this time.

OEM 2009 Toyota Camry ABS Control Module

Anti Lock Brake Control Module

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

6 ABS Control Modules found

View related parts
2009 Toyota Camry Modulator Valve
Part Number: 44050-30660
$1026.94 MSRP: $1292.72
You Save: $265.78 (21%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Actuator Assembly, Brake; ABS Hydraulic Assembly; ABS Control Module; Actuator
- Replaces: 44050-30300
- Item Weight: 15.50 Pounds
- Item Dimensions: 9.4 x 8.1 x 6.5 inches
- Condition: New
- SKU: 44050-30660
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
More Info
Fits the following 2009 Toyota Camry Submodels:
- Hybrid | 4 Cyl 2.4 L FULL HYBRID EV-GAS (FHEV)
View related parts
2009 Toyota Camry Modulator Valve
Part Number: 44050-06070
$901.86 MSRP: $1135.26
You Save: $233.40 (21%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Actuator Assembly, Brake; ABS Modulator Valve; ABS Control Module; Actuator
- Part Name Code: 44510
- Item Weight: 5.50 Pounds
- Item Dimensions: 7.1 x 7.2 x 5.1 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 44050-06070
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
More Info
Fits the following 2009 Toyota Camry Submodels:
- Base, CE, LE, SE, XLE | 4 Cyl 2.4 L GAS, 6 Cyl 3.5 L GAS
View related parts
2009 Toyota Camry Control Module
Part Number: 89540-33390
$2379.58 MSRP: $2995.44
You Save: $615.86 (21%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Computer Assembly, Skid; ABS Control Module; Computer Assembly, Skid Control
- Part Name Code: 89540
- Item Weight: 1.60 Pounds
- Item Dimensions: 8.1 x 6.3 x 3.7 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 89540-33390
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
More Info
Fits the following 2009 Toyota Camry Submodels:
- Hybrid | 4 Cyl 2.4 L FULL HYBRID EV-GAS (FHEV)
View related parts
2009 Toyota Camry Modulator Valve
Part Number: 44050-33160
$1145.88 MSRP: $1442.44
You Save: $296.56 (21%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Actuator Assembly, Brake; ABS Modulator Valve; ABS Control Module; Actuator
- Manufacturer Note: W(VSC)
- Part Name Code: 44510
- Item Weight: 8.70 Pounds
- Item Dimensions: 9.2 x 8.2 x 6.6 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 44050-33160
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
More Info
Fits the following 2009 Toyota Camry Submodels:
- Base, CE, LE, SE, XLE | 4 Cyl 2.4 L GAS, 6 Cyl 3.5 L GAS
View related parts
2009 Toyota Camry Modulator Valve
Part Number: 44050-33240
$885.86 MSRP: $1115.12
You Save: $229.26 (21%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Actuator Assembly, Brake; ABS Modulator Valve; ABS Control Module; Actuator
- Part Name Code: 44510
- Item Weight: 5.30 Pounds
- Item Dimensions: 9.3 x 7.7 x 6.1 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 44050-33240
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
More Info
Fits the following 2009 Toyota Camry Submodels:
- Base, CE, LE, SE, XLE | 4 Cyl 2.4 L GAS, 6 Cyl 3.5 L GAS
View related parts
2009 Toyota Camry Modulator Valve
Part Number: 44050-06080
$950.78 MSRP: $1196.85
You Save: $246.07 (21%)
Product Specifications
- Other Name: Actuator Assembly, Brake; ABS Modulator Valve; ABS Control Module; Actuator
- Manufacturer Note: VSC-WITH
- Part Name Code: 44510
- Item Weight: 4.90 Pounds
- Item Dimensions: 9.1 x 7.9 x 6.3 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 44050-06080
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
More Info
Fits the following 2009 Toyota Camry Submodels:
- Base, CE, LE, SE, XLE | 4 Cyl 2.4 L GAS, 6 Cyl 3.5 L GAS

2009 Toyota Camry ABS Control Module

Looking for affordable OEM 2009 Toyota Camry ABS Control Module? Explore our comprehensive catalogue of genuine 2009 Toyota Camry ABS Control Module. All our parts are covered by the manufacturer's warranty. Plus, our straightforward return policy and speedy delivery service ensure an unparalleled shopping experience. We look forward to your visit!

2009 Toyota Camry Parts Questions & Experts Answers

Q: How to remove and replace the ABS Control Module for Antilock Brakes on 2009 Toyota Camry?
A: The work process for Hydraulic Control Assembly for Antilock Brakes installation begins with disconnecting the cable from the negative terminal of the battery. The radiator reserve tank assembly can be detached through hose disconnection followed by removal of the tank assembly itself. The brake fluid needs draining and immediate surface cleaning must occur for all paint areas where fluid spilled. Begin by unlocking the brake actuator with its lock lever before unconnecting its brake actuator connector. Special Service Tool: 09023-00101 permits disconnecting the 6 brake lines from the brake actuator with the bracket assembly while writing down their connection points at 1 for Front Wheel Cylinder RH, 2 for Front Wheel Cylinder LH, 3 for Rear Wheel Cylinder RH, 4 for Rear Wheel Cylinder LH, 5 for 2nd Master Cylinder, 6 for 1st Master Cylinder. Seize the three bolts which mount the brake actuator to the body frame before taking out both components and their bracket assembly while being vigilant about brake lines and wire harnesses during this time.