How to install the ABS Control Module for ADVICS Made on 2008 Toyota Camry?

Start the brake actuator for ADVICS Made installation by using 3 bolts to fix the brake actuator assembly with bracket onto the body at 19 Nm (195 kgf-cm, 14 ft-lbf) torque while protecting brake lines and the wire harness. Secure each brake line in its rightful position into the brake actuator assembly with bracket and attach the tubes to the Front Wheel Cylinder RH and Front Wheel Cylinder LH and the Rear Wheel Cylinder RH and Rear Wheel Cylinder LH as well as 1st Master Cylinder and 2nd Master Cylinder. Expert tool 09023-00101 should be used to tighten each brake line until it reaches 14 Nm (143 kgf-cm, 10 ft-lbf) torque when the tool is in place as opposed to 15 Nm (155 kgf-cm, 11 ft-lbf) torque without it. Maintain a torque wrench with a 250 mm (9.84 in.) fulcrum length for this process. Securely connect the actuator connector and afterward install the radiator reserve tank assembly while making the hose connection to the tank. Insert brake fluid into the reservoir while performing brake line bleeding work followed by attach the negative battery cable terminal. Perform inspector checks on the brake fluid level and leaks when inspecting TMC Made with VSC systems. The last procedure includes carrying out yaw rate sensor zero point calibration as well as performing actuator checks through Techstream.

OEM 2008 Toyota Camry ABS Control Module

Anti Lock Brake Control Module

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

6 ABS Control Modules found

View related parts
2008 Toyota Camry Modulator Valve
Part Number: 44050-30660
$1026.94 MSRP: $1292.72
You Save: $265.78 (21%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Actuator Assembly, Brake; ABS Hydraulic Assembly; ABS Control Module; Actuator
- Replaces: 44050-30300
- Item Weight: 15.50 Pounds
- Item Dimensions: 9.4 x 8.1 x 6.5 inches
- Condition: New
- SKU: 44050-30660
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
More Info
Fits the following 2008 Toyota Camry Submodels:
- Hybrid | 4 Cyl 2.4 L FULL HYBRID EV-GAS (FHEV)
View related parts
2008 Toyota Camry Modulator Valve
Part Number: 44050-06070
$901.86 MSRP: $1135.26
You Save: $233.40 (21%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Actuator Assembly, Brake; ABS Modulator Valve; ABS Control Module; Actuator
- Part Name Code: 44510
- Item Weight: 5.50 Pounds
- Item Dimensions: 7.1 x 7.2 x 5.1 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 44050-06070
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
More Info
Fits the following 2008 Toyota Camry Submodels:
- Base, CE, LE, SE, XLE | 4 Cyl 2.4 L GAS, 6 Cyl 3.5 L GAS
View related parts
2008 Toyota Camry Control Module
Part Number: 89540-33390
$2379.58 MSRP: $2995.44
You Save: $615.86 (21%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Computer Assembly, Skid; ABS Control Module; Computer Assembly, Skid Control
- Part Name Code: 89540
- Item Weight: 1.60 Pounds
- Item Dimensions: 8.1 x 6.3 x 3.7 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 89540-33390
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
More Info
Fits the following 2008 Toyota Camry Submodels:
- Hybrid | 4 Cyl 2.4 L FULL HYBRID EV-GAS (FHEV)
View related parts
2008 Toyota Camry Modulator Valve
Part Number: 44050-33160
$1145.88 MSRP: $1442.44
You Save: $296.56 (21%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Actuator Assembly, Brake; ABS Modulator Valve; ABS Control Module; Actuator
- Manufacturer Note: W(VSC)
- Part Name Code: 44510
- Item Weight: 8.70 Pounds
- Item Dimensions: 9.2 x 8.2 x 6.6 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 44050-33160
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
More Info
Fits the following 2008 Toyota Camry Submodels:
- Base, CE, LE, SE, XLE | 4 Cyl 2.4 L GAS, 6 Cyl 3.5 L GAS
View related parts
2008 Toyota Camry Modulator Valve
Part Number: 44050-33240
$885.86 MSRP: $1115.12
You Save: $229.26 (21%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Actuator Assembly, Brake; ABS Modulator Valve; ABS Control Module; Actuator
- Part Name Code: 44510
- Item Weight: 5.30 Pounds
- Item Dimensions: 9.3 x 7.7 x 6.1 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 44050-33240
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
More Info
Fits the following 2008 Toyota Camry Submodels:
- Base, CE, LE, SE, XLE | 4 Cyl 2.4 L GAS, 6 Cyl 3.5 L GAS
View related parts
2008 Toyota Camry Modulator Valve
Part Number: 44050-06080
$950.78 MSRP: $1196.85
You Save: $246.07 (21%)
Product Specifications
- Other Name: Actuator Assembly, Brake; ABS Modulator Valve; ABS Control Module; Actuator
- Manufacturer Note: VSC-WITH
- Part Name Code: 44510
- Item Weight: 4.90 Pounds
- Item Dimensions: 9.1 x 7.9 x 6.3 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 44050-06080
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
More Info
Fits the following 2008 Toyota Camry Submodels:
- Base, CE, LE, SE, XLE | 4 Cyl 2.4 L GAS, 6 Cyl 3.5 L GAS

2008 Toyota Camry ABS Control Module

Looking for affordable OEM 2008 Toyota Camry ABS Control Module? Explore our comprehensive catalogue of genuine 2008 Toyota Camry ABS Control Module. All our parts are covered by the manufacturer's warranty. Plus, our straightforward return policy and speedy delivery service ensure an unparalleled shopping experience. We look forward to your visit!

2008 Toyota Camry Parts Questions & Experts Answers

Q: How to install the ABS Control Module for ADVICS Made on 2008 Toyota Camry?
A: Start the brake actuator for ADVICS Made installation by using 3 bolts to fix the brake actuator assembly with bracket onto the body at 19 Nm (195 kgf-cm, 14 ft-lbf) torque while protecting brake lines and the wire harness. Secure each brake line in its rightful position into the brake actuator assembly with bracket and attach the tubes to the Front Wheel Cylinder RH and Front Wheel Cylinder LH and the Rear Wheel Cylinder RH and Rear Wheel Cylinder LH as well as 1st Master Cylinder and 2nd Master Cylinder. Expert tool 09023-00101 should be used to tighten each brake line until it reaches 14 Nm (143 kgf-cm, 10 ft-lbf) torque when the tool is in place as opposed to 15 Nm (155 kgf-cm, 11 ft-lbf) torque without it. Maintain a torque wrench with a 250 mm (9.84 in.) fulcrum length for this process. Securely connect the actuator connector and afterward install the radiator reserve tank assembly while making the hose connection to the tank. Insert brake fluid into the reservoir while performing brake line bleeding work followed by attach the negative battery cable terminal. Perform inspector checks on the brake fluid level and leaks when inspecting TMC Made with VSC systems. The last procedure includes carrying out yaw rate sensor zero point calibration as well as performing actuator checks through Techstream.