OEM 2009 Toyota Avalon Wiper Motor

2009 Toyota Avalon Wiper Motor Parts Q&A

• Q: How to install the windshield wiper motor and wiper arm assemblies on 2009 Toyota Avalon?

  A: Installation of the windshield wiper motor begins by fastening the windshield wiper link assembly with 3 bolts applied at 7.5 Nm (76 kgf-cm, 66 in-lbf) torque before connecting the rod to the wiper link assembly. Install the windshield wiper motor with its link assembly by tightening 4 bolts to 7.0 Nm (71 kgf-cm, 62 in-lbf) while connecting the connector. Install the right-hand windshield wiper arm and blade assembly with 4 bolts at 7.0 Nm torque while manually holding the arm hinge during installation. Start the wiper operation then stop motor at automatic position and clean the arm and pivots with wire brush before reinstalling. Secure the right-hand wiper blade assembly with the specified nut through tightening 20 Nm (209 kgf-cm, 15 ft-lbf) using hand-held arm hinge support. The left-hand wiper arm assembly with blade needs installation when the nut reaches its correct position while applying a torque force of 20 Nm (209 kgf-cm, 15 ft-lbf) while holding the arm hinge by hand to ensure proper nut fastening.