My Garage
Cart

OEM 2009 Scion xD Sway Bar Kit

Stabilizer Sway Bar Set
  • Select Vehicle by Model
  • Select Vehicle by VIN
Select Vehicle by Model
Make
Model
Year
or
Select Vehicle by VIN
For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

1 Sway Bar Kit found

  • 2009 Scion xD Sway Bar Kit - 48811-52290
    2009 Scion xD Sway Bar Kit Diagram - 48811-52290
    View related parts

    2009 Scion xD Stabilizer Bar, Front

    Part Number: 48811-52290
    $112.09 MSRP: $157.34
    You Save: $45.25 (29%)
    Ships in 1-3 Business Days
    ADD TO CART
    Product Specifications
    • Other Name: Bar, Stabilizer, Front; Suspension Stabilizer Bar, Front; Sway Bar
    • Position: Front
    • Replaces: 48811-52220
    • Condition: New
    • SKU: 48811-52290
    • Warranty: This genuine part is guaranteed by Toyota's factory warranty.
    Fits the following 2009 Scion xD Submodels:
    • Base | 4 Cyl 1.8 L GAS

2009 Scion xD Sway Bar Kit

Looking for affordable OEM 2009 Scion xD Sway Bar Kit? Explore our comprehensive catalogue of genuine 2009 Scion xD Sway Bar Kit. All our parts are covered by the manufacturer's warranty. Plus, our straightforward return policy and speedy delivery service ensure an unparalleled shopping experience. We look forward to your visit!

2009 Scion xD Parts Questions & Experts Answers

  • Q: How to remove the front Sway Bar Kit on 2009 Scion xD?
    A: The procedure to uninstall the front sway bar kit begins with hood sub-assembly removal followed by front wiper arm head cap removal and subsequent rendering of the front wiper arm and blade assembly from both left and right sides. The next step involves removing the hood to cowl top seal and both cowl top ventilator louver components and the front wiper motor with its link. Take off the right-side front air shutter seal together with the outer cowl top panel. Straighten the wheels before pulling out the front wheel and the column hole cover silencer sheet. Continue with the removal process by taking out the steering sliding yoke sub-assembly together with the No. 1 steering column hole cover sub-assembly. The technicians must remove the tie rod end sub-assemblies from both left and right sides before handling the front lower suspension arm sub-assemblies of both sides. Use a Socket Hexagon Wrench 6 to remove the front sway bar link assemblies from both sides when the ball joint joint rotates with the nut. First suspend the engine assembly before you remove the front suspension crossmember sub-assembly together with the power steering gear. The procedure advances with steps to remove both front sway bar kit No. 1 brackets for both sides by detaching their sway bar brackets using two bolts before extracting the front sway bar kit and the front sway bar kit No. 1 bush.

Related 2009 Scion xD Parts