OEM 2009 Scion tC A/C Condenser

2009 Scion tC Parts Questions & Experts Answers

• Q: How to install an A/C Condenser on 2009 Scion tC?

  A: The installation process for the cooler condenser assembly starts with cooler condenser installation while adding 40 cc (1.4 fl. oz.) ND-8 compressor oil or equivalent when doing a new replacement. You must install the radiator support upper with 5 bolts and 2 nuts while torquing them to 9.8 Nm (100 kgf-cm, 7 ft-lbf). Follow next steps to install first the high pitched horn assembly then the low pitched horn assembly. Use 2 bolts to secure the radiator support upper bracket while torquing them to 19 Nm (194 kgf-cm, 14 ft-lbf). Finally, install the hood lock with 3 bolts. The installation of the cooler refrigerant liquid pipe requires removing vinyl tape followed by applying ND-OIL 8 compressor oil or equivalent to a new O-ring along with the fitting surface before placing the O-ring in position and tightening the two bolts to 5.4 Nm (55 kgf-cm, 47 in-lbf). Installation of the No. 1 cooler refrigerant discharge hose requires compressor oil application on a new O-ring before bolting it in with torque of 5.4 Nm (55 kgf-cm, 47 in-lbf). Begin system initialization after hood sub-assembly adjustment while following an initialization procedure because system requirements demand negative battery terminal cable connection and initialization following battery reconnection. The technician should perform a refrigerant charge followed by engine warm-up and refrigerant leak inspection.