How to remove the Steering Angle Sensor with VSC on 2008 Toyota Tacoma?

A vehicle owner should begin with disconnecting the negative battery cable followed by waiting at least 90 seconds to ensure Air Bag safety before starting the sensor removal. Start by positioning the front wheels directly forward before starting the removal of Steering Wheel Cover Lower No. 2 followed by Steering Wheel Cover Lower No. 3. Steer toward removing both the Steering Pad Assembly along with the Steering Wheel Assembly. The technician should next take away both the Steering Column Cover Lower and the Steering Column Cover Upper. Then, detach the Spiral Cable. You should release the 6 claw fittings that allow you to take the Steering Sensor off the Spiral Cable.

OEM 2008 Toyota Tacoma Steering Angle Sensor

Steering Column Angle Position Sensor

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

1 Steering Angle Sensor found

View related parts
2008 Toyota Tacoma Angle Sensor
Part Number: 89245-07020
$373.63 MSRP: $547.56
You Save: $173.93 (32%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Sensor, Steering; Steering Wheel Position Sensor; Steering Wheel Speed Sensor; Steering Angle Sensor; Steering Sensor Assembly; Sensor
- Replaces: 89245-30080, 89245-48020
- Part Name Code: 89245B
- Item Weight: 0.50 Pounds
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 89245-07020
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
More Info
Fits the following 2008 Toyota Tacoma Submodels:
- Base, Pre Runner, X-Runner | 4 Cyl 2.7 L GAS, 6 Cyl 4.0 L GAS

2008 Toyota Tacoma Steering Angle Sensor

Looking for affordable OEM 2008 Toyota Tacoma Steering Angle Sensor? Explore our comprehensive catalogue of genuine 2008 Toyota Tacoma Steering Angle Sensor. All our parts are covered by the manufacturer's warranty. Plus, our straightforward return policy and speedy delivery service ensure an unparalleled shopping experience. We look forward to your visit!

2008 Toyota Tacoma Steering Angle Sensor Parts Q&A

Q: How to remove the Steering Angle Sensor with VSC on 2008 Toyota Tacoma?
A: A vehicle owner should begin with disconnecting the negative battery cable followed by waiting at least 90 seconds to ensure Air Bag safety before starting the sensor removal. Start by positioning the front wheels directly forward before starting the removal of Steering Wheel Cover Lower No. 2 followed by Steering Wheel Cover Lower No. 3. Steer toward removing both the Steering Pad Assembly along with the Steering Wheel Assembly. The technician should next take away both the Steering Column Cover Lower and the Steering Column Cover Upper. Then, detach the Spiral Cable. You should release the 6 claw fittings that allow you to take the Steering Sensor off the Spiral Cable.