OEM 2008 Toyota Solara Antenna Cable

2008 Toyota Solara Parts Questions & Experts Answers

• Q: How to remove the RADIO ANTENNA CABLE on 2008 Toyota Solara?

  A: The procedure to remove the RADIO ANTENNA CORD starts with the removal of SHIFT LEVER KNOB SUB-ASSEMBLY followed by sequential removal of CONSOLE UPPER REAR PANEL SUB-ASSEMBLY then CONSOLE BOX ASSEMBLY (REAR W/ CONSOLE DOOR) and concludes with CONSOLE PANEL SUB-ASSEMBLY UPPER. The next procedure requires you to uninstall both the INSTRUMENT CLUSTER FINISH PANEL SUB-ASSEMBLY CENTER and the CENTER CLUSTER INTEGRATION PANEL ASSEMBLY. Start the procedure by extracting both the REAR SEAT ASSEMBLY and the REAR SEATBACK HINGE SUB-ASSEMBLY RH. To start the repair process the FRONT DOOR SCUFF PLATE RH, the QUARTER TRIM PANEL ASSEMBLY FRONT RH, the CENTER PILLAR GARNISH RH, the ROOF SIDE GARNISH ASSEMBLY INNER RH and the QUARTER TRIM PANEL UPPER RH must be taken out. The worker must remove the ANTENNA CORD SUB-ASSEMBLY by detaching its 14 clamps and unthreading the nut and bolt securing it. Installation follows exactly the opposite sequence as the removal steps.