How to install the steering angle sensor on 2008 Toyota Sienna?

You must start installation by fitting the sensor onto the spiral cable. The front wheels must be aligned in the direction of straight ahead before you put in the spiral cable sub-assembly. To proceed the installation you must first attach the steering column cover lower and place the spiral cable into its central position. The installation process for steering wheel assembly should begin while conducting a measurement check of the steering wheel center point. Conclude the installation by placing the horn button assembly followed by SRS warning light examination.

OEM 2008 Toyota Sienna Steering Angle Sensor

Steering Column Angle Position Sensor

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

1 Steering Angle Sensor found

View related parts
2008 Toyota Sienna Sensor, Steering
Part Number: 89245-0E011
$465.79 MSRP: $682.63
You Save: $216.84 (32%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Manufacturer Note: W(VSC)
- Replaces: 89245-0E010
- Part Name Code: 89245B
- Item Weight: 0.60 Pounds
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 89245-0E011
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
More Info
Fits the following 2008 Toyota Sienna Submodels:
- CE, LE, Limited, XLE | 6 Cyl 3.5 L GAS

2008 Toyota Sienna Steering Angle Sensor

Looking for affordable OEM 2008 Toyota Sienna Steering Angle Sensor? Explore our comprehensive catalogue of genuine 2008 Toyota Sienna Steering Angle Sensor. All our parts are covered by the manufacturer's warranty. Plus, our straightforward return policy and speedy delivery service ensure an unparalleled shopping experience. We look forward to your visit!

2008 Toyota Sienna Parts Questions & Experts Answers

Q: How to install the steering angle sensor on 2008 Toyota Sienna?
A: You must start installation by fitting the sensor onto the spiral cable. The front wheels must be aligned in the direction of straight ahead before you put in the spiral cable sub-assembly. To proceed the installation you must first attach the steering column cover lower and place the spiral cable into its central position. The installation process for steering wheel assembly should begin while conducting a measurement check of the steering wheel center point. Conclude the installation by placing the horn button assembly followed by SRS warning light examination.