How to remove the blower motor on 2008 Toyota Sienna?

The first step to remove the blower motor involves uninstalling both the instrument panel sub-assembly with passenger Air Bag assembly. The first step involves disconnecting the clip from the heater to foot duct No. 1. The stereo component amplifier assembly must be removed after its detachment. After that, take out the ECM. After unfastening two clamps and two nuts along with the wire harness you can remove the blower assembly through bolting out its bolt while also removing the two screws and the nut.

OEM 2008 Toyota Sienna Blower Motor

A/C Heater Blower Motor

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

2 Blower Motors found

View related parts
2008 Toyota Sienna Blower Motor, Front
Part Number: 87103-08090
$177.30 MSRP: $253.15
You Save: $75.85 (30%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Motor Sub-Assembly, Blower; HVAC Blower Motor Assembly, Front; Blower Assembly; Fan & Motor; Motor Sub-Assembly, Blower W/Fan; HVAC Blower Motor
- Position: Front
- Part Name Code: 87103B
- Item Weight: 4.20 Pounds
- Item Dimensions: 10.2 x 10.2 x 8.5 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 87103-08090
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
More Info
Fits the following 2008 Toyota Sienna Submodels:
- CE, LE, Limited, XLE | 6 Cyl 3.3 L GAS, 6 Cyl 3.5 L GAS
View related parts
2008 Toyota Sienna Blower Motor, Rear
Part Number: 87103-08070
$156.38 MSRP: $221.38
You Save: $65.00 (30%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Motor Sub-Assembly, Blower; HVAC Blower Motor Assembly, Rear; Blower Assembly; Motor Sub-Assembly, Cooling Unit, W/Fan; HVAC Blower Motor
- Position: Rear
- Part Name Code: 87103A
- Item Weight: 3.30 Pounds
- Item Dimensions: 10.5 x 9.5 x 7.8 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 87103-08070
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
More Info
Fits the following 2008 Toyota Sienna Submodels:
- CE, LE, Limited, XLE, XLE Limited | 6 Cyl 3.3 L GAS, 6 Cyl 3.5 L GAS

2008 Toyota Sienna Blower Motor

Looking for affordable OEM 2008 Toyota Sienna Blower Motor? Explore our comprehensive catalogue of genuine 2008 Toyota Sienna Blower Motor. All our parts are covered by the manufacturer's warranty. Plus, our straightforward return policy and speedy delivery service ensure an unparalleled shopping experience. We look forward to your visit!

2008 Toyota Sienna Blower Motor Parts Q&A

Q: How to remove the blower motor on 2008 Toyota Sienna?
A: The first step to remove the blower motor involves uninstalling both the instrument panel sub-assembly with passenger Air Bag assembly. The first step involves disconnecting the clip from the heater to foot duct No. 1. The stereo component amplifier assembly must be removed after its detachment. After that, take out the ECM. After unfastening two clamps and two nuts along with the wire harness you can remove the blower assembly through bolting out its bolt while also removing the two screws and the nut.