How to install the rear spoiler on 2008 Toyota Sequoia?

Begin by placing the 5 pins correctly followed by the rear spoiler cover installation before screwing the 2 nuts to achieve 7.5 Nm (76 kgf-cm, 66 in-lbf) of torque. The next step combines the 2 hole plugs with the connector installation. Finish by putting on the back door side garnishment which starts with the RH part and continues with the LH part followed by the center garnishment on the back door.

OEM 2008 Toyota Sequoia Spoiler

Spoiler Wing

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

1 Spoiler found

View related parts
2008 Toyota Sequoia Spoiler, Rear Driver Side
Part Number: 76871-0C902
$519.71 MSRP: $761.63
You Save: $241.92 (32%)
ADD TO CART
Product Specifications
- Other Name: Cover, Rear Spoiler, L; Spoiler, Rear; Cover, Rear Spoiler
- Position: Rear Driver Side
- Part Name Code: 76871B
- Item Weight: 6.40 Pounds
- Item Dimensions: 53.0 x 11.6 x 7.2 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 76871-0C902
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
More Info
Fits the following 2008 Toyota Sequoia Submodels:
- Limited, Nightshade, Platinum, SR5, TRD Pro, TRD Sport | 8 Cyl 4.6 L GAS, 8 Cyl 4.7 L GAS, 8 Cyl 5.7 L FLEX, 8 Cyl 5.7 L GAS

2008 Toyota Sequoia Spoiler

Looking for affordable OEM 2008 Toyota Sequoia Spoiler? Explore our comprehensive catalogue of genuine 2008 Toyota Sequoia Spoiler. All our parts are covered by the manufacturer's warranty. Plus, our straightforward return policy and speedy delivery service ensure an unparalleled shopping experience. We look forward to your visit!

2008 Toyota Sequoia Spoiler Parts Q&A

Q: How to install the rear spoiler on 2008 Toyota Sequoia?
A: Begin by placing the 5 pins correctly followed by the rear spoiler cover installation before screwing the 2 nuts to achieve 7.5 Nm (76 kgf-cm, 66 in-lbf) of torque. The next step combines the 2 hole plugs with the connector installation. Finish by putting on the back door side garnishment which starts with the RH part and continues with the LH part followed by the center garnishment on the back door.