Menu
×
Search Bar
Search by Part Number, Part Name, or Vehicle
My Garage
Cart
Help Center Contact Us

OEM 2008 Toyota Sequoia Blower Motor Resistor

Heater Blower Motor Resistor
  • Select Vehicle by Model
  • Select Vehicle by VIN
Select Vehicle by Model
Make
Model
Year
or
Select Vehicle by VIN
For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

2 Blower Motor Resistors found

  • 2008 Toyota Sequoia Blower Motor Resistor - 88892-0C020
    2008 Toyota Sequoia Blower Motor Resistor Diagram - 88892-0C020
    View related parts

    2008 Toyota Sequoia Cover, Front

    Part Number: 88892-0C020
    $23.47 MSRP: $32.68
    You Save: $9.21 (29%)
    Ships in 1-3 Business Days
    ADD TO CART
    Product Specifications
    • Other Name: Cover, Cooler; Heater Core Access Cover, Front
    • Position: Front
    • Part Name Code: 88892N
    • Item Weight: 1.40 Pounds
    • Condition: New
    • Fitment Type: Direct Replacement
    • SKU: 88892-0C020
    • Warranty: This genuine part is guaranteed by Toyota's factory warranty.
    More Info
    Fits the following 2008 Toyota Sequoia Submodels:
    • Limited, Nightshade, Platinum, SR5, TRD Pro, TRD Sport | 8 Cyl 4.6 L GAS, 8 Cyl 4.7 L GAS, 8 Cyl 5.7 L FLEX, 8 Cyl 5.7 L GAS
  • 2008 Toyota Sequoia Blower Motor Resistor - 87165-28010
    2008 Toyota Sequoia Blower Motor Resistor Diagram - 87165-28010
    View related parts

    2008 Toyota Sequoia Control Module, Rear

    Part Number: 87165-28010
    $200.69 MSRP: $286.55
    You Save: $85.86 (30%)
    Ships in 1-3 Business Days
    ADD TO CART
    Product Specifications
    • Other Name: Control, Blower Motor; HVAC Control Module, Rear; Blower Motor Resistor; Resistor
    • Position: Rear
    • Part Name Code: 87165C
    • Item Weight: 0.70 Pounds
    • Condition: New
    • Fitment Type: Direct Replacement
    • SKU: 87165-28010
    • Warranty: This genuine part is guaranteed by Toyota's factory warranty.
    More Info
    Fits the following 2008 Toyota Sequoia Submodels:
    • Limited, Platinum, SR5 | 8 Cyl 4.7 L GAS, 8 Cyl 5.7 L FLEX, 8 Cyl 5.7 L GAS

2008 Toyota Sequoia Blower Motor Resistor

Looking for affordable OEM 2008 Toyota Sequoia Blower Motor Resistor? Explore our comprehensive catalogue of genuine 2008 Toyota Sequoia Blower Motor Resistor. All our parts are covered by the manufacturer's warranty. Plus, our straightforward return policy and speedy delivery service ensure an unparalleled shopping experience. We look forward to your visit!

2008 Toyota Sequoia Parts Questions & Experts Answers

  • Q: How do you remove the Blower Motor Resistor for the rear side on 2008 Toyota Sequoia?
    A: When replacing the Blower Motor Controller for the rear side it requires removal of the No. 2 deck board sub-assembly and the luggage compartment trim box and rope hook assembly. The next phase requires removal of the No. 1 deck board sub-assembly combined with the deck board reinforcement sub-assembly along with the deck board bracket. The maintenance sequence begins with front cover outer removal of the seat track bracket followed by removal of the inner component and moving onto both power and manual seat types of rear No. 2 seat assembly RH. The worker must take out the rear seat cushion hinge lower cover RH and the rear floor step No. 1 and No. 2 covers and then remove the rear door scuff plate RH and the rear door opening trim Weather Strip RH. The next removal step should involve taking out the rear floor mat support plate together with the quarter trim panel assembly RH that applies to both standard and power seat types. After disconnecting the connector the two screws must be removed to extract the blower motor control device.

Related 2008 Toyota Sequoia Parts

Alternate Year Models

+
2007 Toyota Sequoia Blower Motor Resistor 2009 Toyota Sequoia Blower Motor Resistor