How to install the Blower Motor Resistor and related components for the rear side on 2009 Toyota Sequoia?

The rear side blower motor controller installation requires attaching its 2 screws and connector connection. Install the quarter trim panel assembly RH according to standard seat or power seat guidance before placing the rear floor mat support plate then add the rope hook assembly and rear door opening trim Weather Strip RH and completed the installation with the rear door scuff plate RH. The installation should start with the two rear floor step covers (No. 1 and No. 2) followed by rear seat cushion hinge lower cover RH and rear No. 2 seat assembly RH which fits power and manual seat configurations. The next installation steps include fitting the seat track bracket front cover inner and outer together with the deck board bracket and deck board reinforcement sub-assembly and No. 1 deck board sub-assembly. You should finish the process by installing the luggage compartment trim box followed by the No. 2 deck board sub-assembly.

OEM 2009 Toyota Sequoia Blower Motor Resistor

Heater Blower Motor Resistor

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

3 Blower Motor Resistors found

View related parts
2009 Toyota Sequoia Cover, Front
Part Number: 88892-0C020
$23.47 MSRP: $32.68
You Save: $9.21 (29%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Cover, Cooler; Heater Core Access Cover, Front
- Position: Front
- Part Name Code: 88892N
- Item Weight: 1.40 Pounds
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 88892-0C020
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
More Info
Fits the following 2009 Toyota Sequoia Submodels:
- Limited, Nightshade, Platinum, SR5, TRD Pro, TRD Sport | 8 Cyl 4.6 L GAS, 8 Cyl 4.7 L GAS, 8 Cyl 5.7 L FLEX, 8 Cyl 5.7 L GAS
View related parts
2009 Toyota Sequoia Control Module, Rear
Part Number: 87165-28020
$200.72 MSRP: $286.58
You Save: $85.86 (30%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Control, Blower Motor; HVAC Blower Motor Control Module, Rear; HVAC Control Module, Rear; Blower Motor Resistor; Controller; Resistor
- Position: Rear
- Part Name Code: 87165C
- Item Weight: 0.70 Pounds
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 87165-28020
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
More Info
Fits the following 2009 Toyota Sequoia Submodels:
- Limited, Platinum, SR5, TRD Pro, TRD Sport | 8 Cyl 4.6 L GAS, 8 Cyl 4.7 L GAS, 8 Cyl 5.7 L FLEX, 8 Cyl 5.7 L GAS
View related parts
2009 Toyota Sequoia Control Module, Rear
Part Number: 87165-28010
$200.72 MSRP: $286.58
You Save: $85.86 (30%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Control, Blower Motor; HVAC Control Module, Rear; Blower Motor Resistor; Resistor
- Position: Rear
- Part Name Code: 87165C
- Item Weight: 0.70 Pounds
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 87165-28010
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
More Info
Fits the following 2009 Toyota Sequoia Submodels:
- Limited, Platinum, SR5 | 8 Cyl 4.7 L GAS, 8 Cyl 5.7 L FLEX, 8 Cyl 5.7 L GAS

2009 Toyota Sequoia Blower Motor Resistor

Looking for affordable OEM 2009 Toyota Sequoia Blower Motor Resistor? Explore our comprehensive catalogue of genuine 2009 Toyota Sequoia Blower Motor Resistor. All our parts are covered by the manufacturer's warranty. Plus, our straightforward return policy and speedy delivery service ensure an unparalleled shopping experience. We look forward to your visit!

2009 Toyota Sequoia Blower Motor Resistor Parts Q&A

Q: How to install the Blower Motor Resistor and related components for the rear side on 2009 Toyota Sequoia?
A: The rear side blower motor controller installation requires attaching its 2 screws and connector connection. Install the quarter trim panel assembly RH according to standard seat or power seat guidance before placing the rear floor mat support plate then add the rope hook assembly and rear door opening trim Weather Strip RH and completed the installation with the rear door scuff plate RH. The installation should start with the two rear floor step covers (No. 1 and No. 2) followed by rear seat cushion hinge lower cover RH and rear No. 2 seat assembly RH which fits power and manual seat configurations. The next installation steps include fitting the seat track bracket front cover inner and outer together with the deck board bracket and deck board reinforcement sub-assembly and No. 1 deck board sub-assembly. You should finish the process by installing the luggage compartment trim box followed by the No. 2 deck board sub-assembly.