How to install the rear blower motor and associated components on 2008 Toyota Sequoia?

The installation process for the rear blower motor begins with attaching the blower with fan motor sub-assembly through 3 screws and then connecting its connector. Drop in the quarter trim panel assembly RH for Standard or Power Seat after which the rear floor mat support plate must be attached alongside rope hook assembly and rear door opening trim Weather Strip RH and rear door scuff plate RH. Before moving on to install the rear seat cushion hinge lower cover RH install the rear floor step No. 1 cover and rear floor step No. 2 cover. The rear No. 2 seat assembly RH requires the Power Seat version or Manual Seat version depending on choice before receiving the seat track bracket front cover inner and outer. Conclude the installation with the placement of deck board bracket as well as deck board reinforcement sub-assembly and No. 1 deck board sub-assembly followed by rope hook assembly and luggage compartment trim box then No. 2 deck board sub-assembly.

OEM 2008 Toyota Sequoia Blower Motor

A/C Heater Blower Motor

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

2 Blower Motors found

View related parts
2008 Toyota Sequoia Blower Motor, Front
Part Number: 87103-0C051
$148.39 MSRP: $210.07
You Save: $61.68 (30%)
ADD TO CART
Product Specifications
- Other Name: Motor Sub-Assembly, Blower; HVAC Blower Motor Assembly, Front; Blower Assembly; Fan & Motor; Motor Sub-Assembly, Blower W/Fan; HVAC Blower Motor
- Position: Front
- Replaces: 87103-0C050
- Part Name Code: 87103B
- Item Weight: 4.20 Pounds
- Item Dimensions: 12.6 x 12.1 x 12.2 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 87103-0C051
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
More Info
Fits the following 2008 Toyota Sequoia Submodels:
- Limited, Nightshade, Platinum, SR5, TRD Pro, TRD Sport | 8 Cyl 4.6 L GAS, 8 Cyl 4.7 L GAS, 8 Cyl 5.7 L FLEX, 8 Cyl 5.7 L GAS
View related parts
2008 Toyota Sequoia Blower Motor, Rear
Part Number: 87103-0C061
$151.21 MSRP: $214.06
You Save: $62.85 (30%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Motor Sub-Assembly, Blower; HVAC Blower Motor Assembly, Rear; Blower Assembly; Motor Sub-Assembly, Blower W/Fan(For Rear); HVAC Blower Motor
- Position: Rear
- Replaces: 87103-0C060
- Part Name Code: 87103D
- Item Weight: 8.30 Pounds
- Item Dimensions: 10.5 x 9.7 x 8.2 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 87103-0C061
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
More Info
Fits the following 2008 Toyota Sequoia Submodels:
- Capstone, Limited, Nightshade, Platinum, SR5, TRD Pro, TRD Sport | 6 Cyl 3.4 L FULL HYBRID EV-GAS (FHEV), 8 Cyl 4.6 L GAS, 8 Cyl 4.7 L GAS, 8 Cyl 5.7 L FLEX, 8 Cyl 5.7 L GAS

2008 Toyota Sequoia Blower Motor

Looking for affordable OEM 2008 Toyota Sequoia Blower Motor? Explore our comprehensive catalogue of genuine 2008 Toyota Sequoia Blower Motor. All our parts are covered by the manufacturer's warranty. Plus, our straightforward return policy and speedy delivery service ensure an unparalleled shopping experience. We look forward to your visit!

2008 Toyota Sequoia Blower Motor Parts Q&A

Q: How to install the rear blower motor and associated components on 2008 Toyota Sequoia?
A: The installation process for the rear blower motor begins with attaching the blower with fan motor sub-assembly through 3 screws and then connecting its connector. Drop in the quarter trim panel assembly RH for Standard or Power Seat after which the rear floor mat support plate must be attached alongside rope hook assembly and rear door opening trim Weather Strip RH and rear door scuff plate RH. Before moving on to install the rear seat cushion hinge lower cover RH install the rear floor step No. 1 cover and rear floor step No. 2 cover. The rear No. 2 seat assembly RH requires the Power Seat version or Manual Seat version depending on choice before receiving the seat track bracket front cover inner and outer. Conclude the installation with the placement of deck board bracket as well as deck board reinforcement sub-assembly and No. 1 deck board sub-assembly followed by rope hook assembly and luggage compartment trim box then No. 2 deck board sub-assembly.