How to install the Cruise Control Switch on 2008 Toyota RAV4?

Secure the main switch with its two screws using 1.7 to 3.0 Nm of torque while connecting the connector afterward. After installing the steering pad assembly the cable needs to be attached to the negative battery terminal. Inspection of the SRS warning light should be included during the first diagnostic phase of the diagnosis system.

OEM 2008 Toyota RAV4 Cruise Control Switch

Steering Wheel Cruise Control Switch

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

1 Cruise Control Switch found

View related parts
2008 Toyota RAV4 On/Off Switch
Part Number: 84632-08021
$142.97 MSRP: $202.39
You Save: $59.42 (30%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Switch, Speed Control; Cruise Control Switch; Multi Purpose Switch; Main Switch; Cruise Switch; Engagement Switch; Set/Resume Switch; Switch Assembly, Cruise Control
- Replaces: 84632-34011, 84632-0F010, 84632-34010, 84632-08020
- Item Weight: 0.50 Pounds
- Item Dimensions: 13.5 x 11.6 x 2.1 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 84632-08021
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
More Info
Fits the following 2008 Toyota RAV4 Submodels:
- Base, L, LE, Limited, Sport, XLE | 4 Cyl 2.4 L GAS, 4 Cyl 2.5 L GAS, 6 Cyl 3.5 L GAS

2008 Toyota RAV4 Cruise Control Switch

Looking for affordable OEM 2008 Toyota RAV4 Cruise Control Switch? Explore our comprehensive catalogue of genuine 2008 Toyota RAV4 Cruise Control Switch. All our parts are covered by the manufacturer's warranty. Plus, our straightforward return policy and speedy delivery service ensure an unparalleled shopping experience. We look forward to your visit!

2008 Toyota RAV4 Parts Questions & Experts Answers

Q: How to install the Cruise Control Switch on 2008 Toyota RAV4?
A: Secure the main switch with its two screws using 1.7 to 3.0 Nm of torque while connecting the connector afterward. After installing the steering pad assembly the cable needs to be attached to the negative battery terminal. Inspection of the SRS warning light should be included during the first diagnostic phase of the diagnosis system.