How to install the drive belt on 2008 Toyota Prius?

The 1NZ-FXE engine drive belt installation begins with placing the belt briefly on each pulley. Follow the process by using tool B to turn adjust bolt B followed by tightening nut A to 40 Nm torque (408 kgf-cm, 30 ft-lbf). Measure the drive belt tension after positioning the adjust bolt B and tightening nut A to a torque of 40 Nm (408 kgf-cm, 30 ft-lbf). Connect and tighten the No. 1 air cleaner inlet to its case with a clamp until it reaches 3.0 Nm boarding torque (31 kgf-cm at 27 in-lbf). Install the engine by placing it underneath the right-hand side covers.

OEM 2008 Toyota Prius Drive Belt

Serpentine Belt

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

1 Drive Belt found

View related parts
2008 Toyota Prius Serpentine Belt
Part Number: 90916-02570
$16.48 MSRP: $22.94
You Save: $6.46 (29%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Belt, V-Ribbed; Serpentine Belt Drive Kit; Accessory Drive Belt; Drive Belt; V-Belt; Belt, V(For Fan & Alternator)
- Part Name Code: 16361A
- Item Weight: 0.50 Pounds
- Item Dimensions: 15.1 x 4.1 x 0.4 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 90916-02570
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
More Info
Fits the following 2008 Toyota Prius Submodels:
- Base, Touring | 4 Cyl 1.5 L FULL HYBRID EV-GAS (FHEV)

2008 Toyota Prius Drive Belt

Looking for affordable OEM 2008 Toyota Prius Drive Belt? Explore our comprehensive catalogue of genuine 2008 Toyota Prius Drive Belt. All our parts are covered by the manufacturer's warranty. Plus, our straightforward return policy and speedy delivery service ensure an unparalleled shopping experience. We look forward to your visit!

2008 Toyota Prius Parts Questions & Experts Answers

Q: How to install the drive belt on 2008 Toyota Prius?
A: The 1NZ-FXE engine drive belt installation begins with placing the belt briefly on each pulley. Follow the process by using tool B to turn adjust bolt B followed by tightening nut A to 40 Nm torque (408 kgf-cm, 30 ft-lbf). Measure the drive belt tension after positioning the adjust bolt B and tightening nut A to a torque of 40 Nm (408 kgf-cm, 30 ft-lbf). Connect and tighten the No. 1 air cleaner inlet to its case with a clamp until it reaches 3.0 Nm boarding torque (31 kgf-cm at 27 in-lbf). Install the engine by placing it underneath the right-hand side covers.