Other Name: Regulator Sub-Assembly; Window Regulator, Rear Left; Regulator Sub-Assembly, Rear Door Window, Driver Side; Window Regulator
Position: Driver Side
Part Name Code: 69804
Item Weight: 1.30 Pounds
Item Dimensions: 14.7 x 7.3 x 1.2 inches
Condition: New
Fitment Type: Direct Replacement
SKU: 69804-35080
Warranty: This genuine part is guaranteed by Toyota's
factory warranty.
More Info
Fits the following 2008 Toyota Land Cruiser Submodels:
Base, Heritage Edition | 8 Cyl 5.7 L GAS
2008 Toyota Land Cruiser Window Regulator
Looking for affordable OEM 2008 Toyota Land Cruiser Window Regulator? Explore our comprehensive catalogue of genuine 2008 Toyota Land Cruiser Window Regulator. All our parts are covered by the manufacturer's warranty. Plus, our straightforward return policy and speedy delivery service ensure an unparalleled shopping experience. We look forward to your visit!
2008 Toyota Land Cruiser Window Regulator Parts Q&A
Q: How to remove the rear door window regulator on 2008 Toyota Land Cruiser?
A: The first step to remove the rear door window regulator requires disconnecting the negative battery cable then waiting 90 seconds to deactivate the SRS system. The first step includes removing the bezel inside the rear door handle and then proceeding with the base panel assembly of the armrest and assist grip and trim board. The process requires removal of the rear inner door glass Weather Strip and rear speaker set and the rear door service hole cover and rear door glass run. The service technician must first remove the rear door rear lower window frame sub-assembly as well as the rear door quarter window glass and the rear door glass sub-assembly. The removal of rear door window regulator sub-assembly and rear power window regulator motor assembly requires a T25 "TORX" driver to dislodge three motor mounting screws with extreme caution to avoid motor damage by dropping it.