How to install the ABS Control Module with the brake actuator and bracket on 2008 Toyota Avalon?

The brake actuator requires assembly through three bolts to which apply 19 Nm (194 kgf-cm, 14 ft-lbf) while maintaining distance from brake tubes and the wire harness. The brake tubes must be attached to their appropriate positions on the actuator bracket using Special Service Tool: 09023-00101 and a torque of 15 Nm (155 kgf-cm, 11 ft-lbf). Start by filling the brake fluid into the reservoir and perform a master cylinder and brake line bleeding procedure. Check the brake fluid level in the reservoir together with inspecting for any fluid leakage from the system. After reconnecting the negative battery cable it is important to note that certain systems need initialization following the cable reinstall. Perform the yaw rate sensor zero point calibration while using Techstream to check the brake actuator.

OEM 2008 Toyota Avalon ABS Control Module

Anti Lock Brake Control Module

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

3 ABS Control Modules found

View related parts
2008 Toyota Avalon Modulator Valve
Part Number: 44050-07100
$1062.35 MSRP: $1337.29
You Save: $274.94 (21%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Actuator Assembly, Brake; ABS Hydraulic Assembly; ABS Pump And Motor Assembly; ABS Control Module; Actuator Assembly
- Manufacturer Note: VEHICLE STABILITY CONT-WITH(W/TRACTION CONTROL)
- Part Name Code: 44510
- Item Weight: 5.00 Pounds
- Item Dimensions: 9.3 x 7.9 x 6.0 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 44050-07100
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
More Info
Fits the following 2008 Toyota Avalon Submodels:
- Limited, Touring, XL, XLS | 6 Cyl 3.5 L GAS
View related parts
2008 Toyota Avalon Modulator Valve
Part Number: 44050-07090
$846.02 MSRP: $1064.97
You Save: $218.95 (21%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Actuator Assembly, Brake; ABS Hydraulic Assembly; ABS Pump And Motor Assembly; ABS Control Module; Actuator Assembly
- Part Name Code: 44510
- Item Weight: 5.10 Pounds
- Item Dimensions: 9.3 x 7.7 x 6.1 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 44050-07090
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
More Info
Fits the following 2008 Toyota Avalon Submodels:
- Limited, Touring, XL, XLS | 6 Cyl 3.5 L GAS
View related parts
2008 Toyota Avalon Modulator Valve
Part Number: 44050-07110
$1051.00 MSRP: $1323.00
You Save: $272.00 (21%)
Product Specifications
- Other Name: Actuator Assembly, Brake; ABS Hydraulic Assembly; ABS Pump And Motor Assembly; ABS Control Module; Actuator Assembly
- Manufacturer Note: CRUISE CONTROL-LASER RADAR CRUISE&VEHICLE STABILITY CONT-WITH(W/TRACTION CONTROL)
- Part Name Code: 44510
- Item Weight: 5.10 Pounds
- Item Dimensions: 9.3 x 7.8 x 6.2 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 44050-07110
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
More Info
Fits the following 2008 Toyota Avalon Submodels:
- Limited, Touring, XL, XLS | 6 Cyl 3.5 L GAS

2008 Toyota Avalon ABS Control Module

Looking for affordable OEM 2008 Toyota Avalon ABS Control Module? Explore our comprehensive catalogue of genuine 2008 Toyota Avalon ABS Control Module. All our parts are covered by the manufacturer's warranty. Plus, our straightforward return policy and speedy delivery service ensure an unparalleled shopping experience. We look forward to your visit!

2008 Toyota Avalon Parts Questions & Experts Answers

Q: How to install the ABS Control Module with the brake actuator and bracket on 2008 Toyota Avalon?
A: The brake actuator requires assembly through three bolts to which apply 19 Nm (194 kgf-cm, 14 ft-lbf) while maintaining distance from brake tubes and the wire harness. The brake tubes must be attached to their appropriate positions on the actuator bracket using Special Service Tool: 09023-00101 and a torque of 15 Nm (155 kgf-cm, 11 ft-lbf). Start by filling the brake fluid into the reservoir and perform a master cylinder and brake line bleeding procedure. Check the brake fluid level in the reservoir together with inspecting for any fluid leakage from the system. After reconnecting the negative battery cable it is important to note that certain systems need initialization following the cable reinstall. Perform the yaw rate sensor zero point calibration while using Techstream to check the brake actuator.