Other Name: Weatherstrip, Front Door; Door Window Belt Weatherstrip, Front Right; Door Seal; Weatherstrip, Front Door Glass, Inner Passenger Side; Weatherstrip
Position: Inner Passenger Side
Part Name Code: 68171B
Item Weight: 0.60 Pounds
Condition: New
Fitment Type: Direct Replacement
SKU: 68171-35130
Warranty: This genuine part is guaranteed by Toyota's
factory warranty.
More Info
Fits the following 2008 Toyota 4Runner Submodels:
Limited, Sport, SR5 | 6 Cyl 4.0 L GAS, 8 Cyl 4.7 L GAS
Other Name: Weatherstrip, Front Door; Door Window Belt Weatherstrip, Front Left; Door Seal; Weatherstrip, Front Door Glass, Inner Driver Side; Weatherstrip
Position: Inner Driver Side
Part Name Code: 68172A
Item Weight: 0.60 Pounds
Item Dimensions: 39.5 x 5.2 x 5.2 inches
Condition: New
Fitment Type: Direct Replacement
SKU: 68172-35030
Warranty: This genuine part is guaranteed by Toyota's
factory warranty.
More Info
Fits the following 2008 Toyota 4Runner Submodels:
Limited, Sport, SR5 | 6 Cyl 4.0 L GAS, 8 Cyl 4.7 L GAS
Other Name: Weatherstrip, Front Door; Door Seal; Weatherstrip, Front Door Opening Trim, Passenger Side; Weatherstrip
Position: Passenger Side
Part Name Code: 62311C
Item Weight: 5.20 Pounds
Item Dimensions: 32.6 x 13.3 x 3.1 inches
Condition: New
Fitment Type: Direct Replacement
SKU: 62311-35020-B0
Warranty: This genuine part is guaranteed by Toyota's
factory warranty.
More Info
Fits the following 2008 Toyota 4Runner Submodels:
Limited, Sport, SR5 | 6 Cyl 4.0 L GAS, 8 Cyl 4.7 L GAS
| Page 1 of 2 |Next >
1-20 of 23 Results
2008 Toyota 4Runner Weather Strip
Looking for affordable OEM 2008 Toyota 4Runner Weather Strip? Explore our comprehensive catalogue of genuine 2008 Toyota 4Runner Weather Strip. All our parts are covered by the manufacturer's warranty. Plus, our straightforward return policy and speedy delivery service ensure an unparalleled shopping experience. We look forward to your visit!
2008 Toyota 4Runner Parts Questions & Experts Answers
Q: How to remove the Front Door Window Glass Weather Strip on 2008 Toyota 4Runner?
A: The first step to remove the Front Door Window Glass Weather Strip is by taking out the Power Window Regulator Master Switch Assembly. The work sequence begins with unscrewing the Front Door Lower Frame Bracket Garnish LH then unmounting the Front Door Inside Handle Bezel LH followed by the Front Armrest Assembly LH and the Front Door Trim Board Sub-Assembly LH. Proceed with the removal of Front Door Service Hole Cover LH and then Outer Rear View Mirror Assembly LH. You must proceed to eliminate the Front Door Window Frame Moulding Rear LH from the system. Use protective tape under the glass Weather Strip assembly before removing the screw then use a screwdriver or moulding remover to disconnect the claw while taking off the glass Weather Strip with the tip of the screwdriver taped first.