How to install a Yaw Sensor on 2008 Scion xD?

Begin sensor installation by attaching it with two bolts tightened to 14 Nm (143 kgf-cm, 10 ft-lbf) torque value before connecting the sensor connector. The yaw rate and acceleration sensor protector needs installation with 2 nuts that should be torqued at 9.0 Nm (92 kgf-cm, 80 in-lbf). The next step of the installation process includes fitting the rear console box cover. Affix the cable to the negative battery terminal but maintain a torque force of 5.4 Nm (55 kgf-cm, 48 in-lbf). Perform the calibration of yaw rate and acceleration sensors before verifying VSC sensor signal output.

OEM 2008 Scion xD Yaw Sensor

Yaw Rate Sensor

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

1 Yaw Sensor found

View related parts
2008 Scion xD Yaw Rate Sensor
Part Number: 89180-52010
$923.94 MSRP: $1354.04
You Save: $430.10 (32%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Sensor Assembly, Yawrate; Sensor, Yawrate
- Manufacturer Note: VEHICLE STABILITY CONT-WITH PUMP UP BA
- Part Name Code: 89183A
- Item Weight: 0.70 Pounds
- Item Dimensions: 5.5 x 4.1 x 3.0 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 89180-52010
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
More Info
Fits the following 2008 Scion xD Submodels:
- Base | 4 Cyl 1.8 L GAS

2008 Scion xD Yaw Sensor

Looking for affordable OEM 2008 Scion xD Yaw Sensor? Explore our comprehensive catalogue of genuine 2008 Scion xD Yaw Sensor. All our parts are covered by the manufacturer's warranty. Plus, our straightforward return policy and speedy delivery service ensure an unparalleled shopping experience. We look forward to your visit!

2008 Scion xD Parts Questions & Experts Answers

Q: How to install a Yaw Sensor on 2008 Scion xD?
A: Begin sensor installation by attaching it with two bolts tightened to 14 Nm (143 kgf-cm, 10 ft-lbf) torque value before connecting the sensor connector. The yaw rate and acceleration sensor protector needs installation with 2 nuts that should be torqued at 9.0 Nm (92 kgf-cm, 80 in-lbf). The next step of the installation process includes fitting the rear console box cover. Affix the cable to the negative battery terminal but maintain a torque force of 5.4 Nm (55 kgf-cm, 48 in-lbf). Perform the calibration of yaw rate and acceleration sensors before verifying VSC sensor signal output.